Operation Manual

13
Gigaset S850A GO / LUG GR en / A31008-M2625-T101-1-8U19 / starting_GO.fm / 6/4/15
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Base station
Connecting the headset
¤ Connect the headset with 2.5 mm jack to the left side of the
handset .
For information on recommended headsets, see the relevant
produc
t page at
www.gigaset.com/s850.
The headset volume corresponds with the setting for the receiver
vo
lume ( p. 86).
Connecting the USB data cable
For data exchange between the handset and PC:
¤ Connect the USB data cable with micro-USB plug into the
USB socket at the bottom of the handset .
Base station
Connecting to the mains power supply
¤ Insert the power cable of the power
adapter into the upper connection socket
at the rear of the base station.
¤ Push both cables into the appropriate cable
channels .
¤ Insert the power adapter into the power
socket .
Connect the handset directly to the PC, not via a
USB hub.
1
1
1
1
1
3
2
1
2
3
Only use the supplied network cable.
The network cable must always be connected in order to function, as the phone will
not operate without a power supply.