Operation Manual

122
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Technical data
Gigaset S850A GO / LUG GR en / A31008-M2625-T101-1-8U19 / appendix_technical_GO.fm / 6/4/15
Base station power consumption
General specifications
Bluetooth
Pin connections on the telephone jack
In standby mode approx. 0.5 W
During a call approx. 0.6 W
DECT standard Supported
GAP standard Supported
No. of channels 60 duplex channels
Radio frequency range 1880-1900 MHz
Duplex mode Time division multiplexing, 10 ms frame length
Repetition frequency of the transmission
pulse
100 Hz
Duration of the transmission pulse 370 µs
Channel grid 1728 kHz
Bit rate 1152 kbit/s
Modulation GFSK
Language code 32 kbit/s
Transmission power 10 mW average power per channel, 250 mW pulse power
Range Up to 50 m indoors, up to 300 m outdoors
Base station power supply 230 V ~/50 Hz
Environmental conditions for operation +5 °C to +45 °C; 20% to 75% relative humidity
Dialling mode DTMF (tone dialling)/PD (pulse dialling)
Codec G.711, G.726, G.729AB with VAD/CNG, G.722
Quality of Service TOS, DiffServ
Protocols SIP, RTP, DHCP, NAT Traversal (STUN), HTTP
Radio frequency range 2402-2480 MHz
Transmission power 4 mW pulse power
3
2
1
4
5
6
1unused
2unused
3a
4b
5unused
6unused