Operation Manual
39
Working with the Gigaset N720 SPK PRO
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2316-L101-2-7619 / mess_kit.fm / 10.02.2012
Version 2, 06.08.2010
Activating/deactivating speaker mode
You can also test the quality of the connection via the loudspeaker instead of via the
headset.
d Press the speaker key to switch between earpiece mode and speaker mode.
¤ In this case, place the plastic cover supplied on the headset socket. This improves the
quality in speaker mode.
Activating/deactivating metering mode
The handset is in metering mode when it is activated.
Exiting metering mode
You exit metering mode by resetting the handset:
v £ Ï £ System £ Handset Reset
Reactivating metering mode via the service menu
If you have exited metering mode, you can reactivate it via the service menu. Proceed as
follows:
a
Press and hold the off key to deactivate the handset.
4 a Press and 4 at the same time and hold them down. Then press
and hold the on key
a.
The handset is now in service mode.
~
Enter the five-digit service PIN. On delivery this is 76200.
The service menu is opened.
s Select the Metering Mode entry with the
navigation key.
§Change§ Press the display key to activate the entry.
As soon as you have activated metering mode, the RSSI
measurement menu is opened.
Here you can change the settings for the unit of measure
and the measurement interval.
Metering Mode
Working Time
Apprv. Narr.Band
Apprv. Wide Band
Back Change
Service
³
´
´
SAR