Operation Manual

Taking measurements

Gigaset N720 DECT IP Multicell System / engbt / A31008-M2316-L101-2-7619 / measure.fm / 10.02.2012

Version 2, 06.08.2010

¤ Install the measuring base station at this location and take the measurements as for

the first position.

¤ Enter the results in the plan and the measurement log.

¤ Now take this measurement for all planned assembly locations.

Example of a measurement log for measuring the synchronisation overlap

The result of the measurement is that the signal strength is sufficient for synchronisation

everywhere. Base station E only receives base station D with sufficient quality.

Here, a sensible synchronisation hierarchy would be:

Measuring

point

Base station A Base station B Base station C Base station D Base station E

A –52 dBm/100% –40 dBm/100% –58 dBm/100% ----

B –50 dBm/100% –48 dBm/100% ---- –70 dBm/92%

C –42 dBm/100% –46 dBm/100% –50 dBm/100% ----

D –60 dBm/100% ----- –48 dBm/100% –64 dBm/100%

E ---- –68 dBm/94% ---- –62 dBm/100%

Sync level 1 Base station C

Sync level 2 Base stations A, B and D

Sync level 3 Base station E