Operation Manual
23
Taking measurements
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2316-L101-2-7619 / measure.fm / 31.10.2013
Version 2, 06.08.2010
Connection quality
In principle, the measurement of the field strength should always be supplemented by a
check of the connection quality. Interference, e.g., through reflection or external systems
that influence the voice quality, can also occur with good reception power.
Therefore, in addition to the reception power, the Frame quality is also displayed on the
measuring handset. This indicates the percentage rate of the packages received without
errors in a measurement interval. The optimum value is 100%.
Reception power Frame quality Evaluation of the quality
–60 dBm 100 % Good
–60 dBm 99 % Satisfactory
–60 dBm 98 % Adequate
–60 dBm 97 % Weak, not suitable
–60 dBm 96 % Poor, not suitable