User manual

Gigaset GS280 / LUG AU-IE-UK-International en / A31008-N1510-L101-1-7619 / settings.fm / 2/22/19
Template Module, Version 1.2, 11.09.2018
Security
57
Security
Display lock
The display lock protects the device from unauthorised use. When you switch the device on or
enable the display, you are prompted to unlock the device.
The display lock becomes active after a defined time af
ter the device has switched to idle mode.
A pattern, PIN or password is used as the display lock.
Setting up a display lock
¤ Settings Security & location Screen lock Enter the PIN, pattern or pass-
word if you have already specified a lock Select the method . . .
For Pattern:
¤ Draw the pattern - join together at least four dots Continue Repeat the pattern
Confirm
For PI
N:
¤ Enter at least four letters or digits Continue Repeat the PIN OK
For Pa
ssword:
¤ Enter at least four letters or digits Continue Repeat the password OK
Settings for the display lock
¤ Settings Security & location Tap next to Screen lock Make the
setting
Showing/hiding the pattern
Only for a display lock with pattern. When entering the pattern to unlock the device, the pattern
is shown as a line by default. You are able to change this for security reasons.
¤ Enable/disable the switch next to Make pattern visible
Setting the time for automatic display lock
The display lock is enabled once the device has been in idle mode for a certain time.
¤ Automatically lock Select the duration of idle mode
Enabling the display lock when switching on and off
¤ Enable/disable the switch next to Power button instantly locks
None
. . . No security
Swipe . . . The display can be unlocked by swiping over the screen
Before setting up the lock, you can specify whether the device should prompt
unl
ocking at the start.