Operation Manual

Gigaset GS280 / LUG AU-IE-UK-International en / A31008-N1510-L101-1-7619 / settings.fm / 2/22/19
Template Module, Version 1.2, 11.09.2018
Network connections
69
Using two SIM cards
¤ Settings Network & Internet SIM cards . . . Detected SIM cards in
slots 1 and 2 are displayed
Enabling and disabling a SIM card: Enable/disable the switch
Showing information:
¤ Tap an entry . . . The name of the SIM card, the colour used for the card, the mobile network
operator and the phone number are displayed. You can change the name and display colour.
Specify the preferred SIM card for the following functions:
• Mobile data
Only one SIM card can be used for mobile data transmission.
• Calls
You can specify one SIM card for all outgoing calls, or be prompted for which SIM card to use
b
efore every call.
• SMS messages
One SIM card can be defined for sending SMS messages.
WLAN
Use the smartphone to establish a connection to a WLAN, and use the connection to send data
and to surf the Internet.
A connection is established automatically if the sma
rtphone is within range of a registered
WLAN and the WLAN function is enabled.
Enabling/disabling the WLAN function
¤ From the Status bar, swipe down using two fingers . . . The quick settings are displayed Tap
the WLAN icon
or
¤ Settings Network & Internet Wi-Fi Disable/enable WLAN with the On/Off
switch
When WLAN is enabled, the icon is displayed in the Status bar
. The icon shows the signal
strength on four levels. Little arrows in the icon show when data is being sent. The transmission
s
peed is shown next to the symbol.
You might need to perform the assignment anew when you insert a new SIM card or
sw
ap out an existing one.
To prolong the battery life, disable the WLAN func
tion when you are not using it.
WLAN is disabled in Flight mode.