Operation Manual

Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0

Handset settings

Gigaset E560A / LUG NLD-BEL en / A31008-M2708-M201-1-3F19 / settings_HS.fm / 1/31/17

Activating/deactivating the ringer

You can:

• Permanently deactivate the ringer in idle status or when receiving a call

• Deactivate the ringer for the current call only.

The ringer cannot be re-activated while a call is in progress.

Deactivating the ringer permanently

The icon appears in the display.

Reactivating the ringer

Deactivating the ringer for the current call

Activating/deactivating visual call signal

Incoming calls are signalled visually (e.g. in noisy environments).

¤ Menu Settings OK Audio/Visual Signals OK LED Call Signal

OK (=activated)

Advisory/warning tones

Your handset uses advisory tones to tell you about different activities and statuses. The following

tones can be activated and deactivated independently of each other:

• Advisory Tones

• Key click: Every key press is confirmed.

• Confirmation tone (rising tone sequence): At the end of an entry/setting, when the hand-

set is placed in the base and on arrival of a new entry in the answer machine list or the call

list.

• Error tone (descending tone sequence): When you make an incorrect entry.

• Battery Low

The battery requires charging.

• Out of Range Signal

The handset is no longer in range of the base.

You cannot deactivate the confirmation tone for placing the handset in the base.

Activating/deactivating advisory tones

¤ Menu Settings OK Audio/Visual Signals OK Advisory Tones

OK (=on)

Press and hold the star key.

Silence Press the display key.