Operation Manual

Gigaset E560A / LUG NLD-BEL en / A31008-M2708-M201-1-3F19 / applications_LUG.fm / 1/31/17

Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0

Baby monitor

When the baby monitor is switched on, the stored (internal or external) destination number is

called as soon as a defined noise level is exceeded in the vicinity of the handset.

In baby monitor mode, incoming calls are only signalled on the display (without ringtone). The

display backlight is reduced to 50%. Advisory tones are deactivated.

If you accept an incoming call, the baby monitor mode is suspended for the duration of the call,

but the function remains activated. The baby monitor mode is not deactivated by switching the

handset off and on again.

Activating and setting the baby monitor

¤ Menu Baby Monitor OK OK ( = baby monitor activated)

If a destination number has already been entered, the baby

monitor is activated with this. The display shows Baby Monitor:

and the specified destination number

If a destination number has not yet been entered:

Activate an External call: OK Enter the number OK

or activate an internal call:

¤ Internal call OK . . . the baby monitor is triggered on all registered handsets

Changing the destination number

¤ Menu Baby Monitor OK Call Target OK select External call or Internal

call OK

with External call: Insert destination number OK

Deactivating baby monitor/cancelling alarm

The handset should be positioned 1 to 2 metres away from the baby. The microphone

must point towards the baby.

Activating the function reduces the operating time of your handset. For that reason,

place the handset in the charging cradle if necessary.

The baby monitor is activated 20 seconds after switching on.

The answer machine for the destination number must be switched off.

After switching on:

¤ Test sensitivity.

¤ Test the connection, if the alarm is being forwarded to an external number.

Deactivating the baby monitor:

¤ In idle status press the display key Off

Cancelling the baby monitor alarm:

¤ Press the End call key during an alarm

Baby Monitor:

01230000

Off