Operation Manual

Gigaset E560A / LUG NLD-BEL en / A31008-M2708-M201-1-3F19 / telephony.fm / 1/31/17

Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0

Making calls

When the display backlight is switched off, pressing any key will activate the backlight. The rel-

evant key function is performed.

Making an external call

External calls are calls to the public telephone network.

¤ Enter the number Press the Talk key briefly

¤ Press and hold the Talk key . . . use to enter the number

Ending call/cancelling selection

¤ Press the End call key or place the handset in the base or charging cradle.

Accepting a call

The handset indicates an incoming call in three ways: by ringing, by a display on the screen and

by the flashing talk key . The signal light on the back of the handset flashes if the function

LED Call Signal is activated ( p. 46).

You can accept the call on the handset by:

¤ Pressing the talk key .

¤ Pressing the handsfree key .

¤ Press the display key Accept.

You can accept the call on the base by pressing the handsfree key and calling from the

base.

Switching the ringtone off:

¤ Press the display key Silence. You can accept the call while it is displayed on the screen.

Dialling the phone number:

• with the Direct dial key p. 13

• from the directory p. 24

• from the missed calls list p. 22

• from the redial list p. 21

If the handset is in the base and the Auto Answer function is activated ( p. 45), the

handset will accept a call automatically when you lift it out of the base.