Operation Manual

50
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Operating the base on the PABX
Gigaset E560A / LUG NLD-BEL en / A31008-M2708-M201-1-3F19 / settings_BS.fm / 1/31/17
Resetting the base to the default settings
When the settings are restored:
• Date and time are retained
• Handsets are still registered,
• Eco Mode and Eco Mode+ is deactivated,
• The system PIN is not reset.
¤ Menu Settings OK System OK Reset Base OK
Operating the base on the PABX
The following settings are only necessary if your PABX requires them; see the PABX user guide.
Changing the dialling mode
¤ Menu Enter digit for the dialling mode:
= tone dialling (DTMF); = pulse dialling (PD) OK
Switching temporarily to tone dialling (DTMF)
If your PABX still operates with pulse dialling (PD), but you need tone dialling for a connection
(e.g., to listen to the network mailbox), you must switch to tone dialling for the call.
Prerequisite: You are conducting a call or have already dialled an external number.
¤ Press the star key .
Tone dialling is now activated for this call only.
Setting recall
¤ Menu Enter digits for recall:
= 80 ms; = 100 ms; = 120 ms; = 400 ms; = 250 ms; = 300 ms;
= 600 ms; = 800 ms OK
Changing the pause after line seizure
You can set the length of the pause inserted between pressing the talk key and sending the
phone number.
¤ Menu Enter digit for the current pause length:
= 1 second; = 3 seconds; = 7 seconds OK
Changing the pause after recall key
¤ Menu Enter digit for the current pause length:
= 800 ms; = 1600 ms; = 3200 ms OK
The answer machine is ready for use approx. 15 seconds after the base has been con-
nected or reset.