Operation Manual

40
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
One touch call
Gigaset E560A / LUG NLD-BEL en / A31008-M2708-M201-1-3F19 / applications_LUG.fm / 1/31/17
One touch call
You can set up your phone so that you can dial a specific number when you press any key on the
keyboard. This allows children, who are unable to enter a number, to call a certain number, for
example.
¤ Menu One Touch clock OK Activation OK (=activated)
If you activate the one touch call, the menu automatically opens up afterwards in order to enter
the destination number.
¤ Call Target: Enter or change the number that you wish to dial.
¤ OK
The activated One Touch Call appears on the idle display. The saved number is dialled by press-
ing any key. Press the End call key to cancel dialling.
Ending one touch call mode
¤ Press display key Off Press and hold the key.
Or:
¤ Press and hold the key
Torch
You can use your telephone as a torch.
Activating/deactivating the torch function
If you have already assigned the emergency function to the key , the emergency
number is also selected if a one touch call is initiated.
Switch on:
¤ Menu Flashlight OK
The torch is activated.
Switch off:
¤ Off
After 2 minutes the function is automatically deactivated.
• The function is automatically deactivated if the emergency function is pressed.
• If the torch is activated, all functions are locked, however the emergency function
still works.
• The torch LED can also be used as an optical call signal for incoming calls ( p. 46).