Operation Manual

59
Gigaset E550/E550 A / UK-IE en / A31008-M2504-L101-1-7619 / T-NetBox_SAG-registration.fm / 4/20/15
A-Klasse_Layout_Neu, Version 4, 28.05.2014
Adjusting the telephone
Switching temporarily to tone dialling (DTMF)
If your PABX still operates with pulse dialling (PD), but you need tone dialling for a
connection (e.g., to listen to the network mailbox), you must switch to tone dialling
for the call.
Prerequisite: You are conducting a call or have already dialled an external number.
¤ Press the star key P.
Tone dialling is now activated for this call only.
Setting recall
§Menu§
¤ P#Q5#12
¤ Enter digits for recall: Q =80ms; 1 = 100 ms; 2 = 120 ms; I = 400 ms;
4 = 250 ms; 5 = 300 ms; L = 600 ms; M = 800 ms
¤ §OK§.
Changing the pause after line seizure
You can set the length of the pause inserted between pressing the talk key c and
sending the phone number.
§Menu§
¤ P#Q5#1O ¤ Enter digit for the current pause length:
1
= 1 second
2
= 3 seconds
I
= 7 seconds ¤ §OK§.
Changing the pause after recall key
§Menu§
¤ P#Q5#14
¤ Enter digit for the current pause length:
1
= 800 ms; 2 = 1600 ms; I = 3200 ms ¤ §OK§.
Operating the telephone on a router
Operation with a router
When operating on the analogue connection of a router, potentially occurring echoes can be
reduced by switching on XES mode 1
1
.
If there are no problems with echoes, the normal mode (factory settings) should be activated.
v
¤ P#Q5#MQ
¤ Q ¤ OK (for normal mode)
¤ 1 ¤ OK (for XES mode 1)
1 XES stands for "eXtended Echo Suppression".