Operation Manual

51
Gigaset E550/E550 A / UK-IE en / A31008-M2504-L101-1-7619 / T-NetBox_SAG-registration.fm / 4/20/15
A-Klasse_Layout_Neu, Version 4, 28.05.2014
Using multiple handsets
Locating a handset ("Paging")
You can locate your handset using the base.
¤ Briefly press the registration/paging key ù on the base ( page 4).
¤ All handsets will ring at the same time ("paging"), even if the ringers are switched
off.
Ending paging
Briefly press the registration/paging key ù on the base ( page 4) or press the talk key
c on the handset.
Changing the name of a handset
The names "INT 1", "INT 2" etc. are assigned automatically on registration. You can
change these names. The name must be no more than 6 characters. The changed
name is displayed in every handset's list.
With the handset in idle status, press the direct dialling key (; to >) that is pro-
grammed for making an internal call to a selected number. The list of handsets
opens. Your own handset is indicated by <.
u
¤ q Select handset u ¤ §Name§ ¤ ~ (Enter name) ¤ §OK§
Listening in to an external call
You want to listen in to an existing external call.
Prerequisite: The Listening In function must be activated.
Activating/deactivating the function:
¤ §Menu§ ¤ q Settings ¤ §OK§ ¤ q Telephony ¤ §OK§ ¤ q Listening In ¤ §OK§
(³=on)
Listening in to the call:
Long press of the talk key con the handset. All participants hear a signal tone. Conf.
Call is shown on the handset display.
Ending listening in:
Press the end call key a on the handset; all participants hear a signal tone.
If the first internal participant presses the end call key a, the handset that has "lis-
tened in" remains connected to the external participant.