Operation Manual

6
Gigaset C530 / LUG ZAF en / A31008-M2512-W101-1-7619 / starting.fm / 6/26/13
Template Borneo, Version 1, 21.06.2012
Getting started
Connecting the base station to the telephone network and the
mains power supply
Mounting the base station on the wall (optional)
Connecting the charging cradle (if included)
¤ Insert the phone cable into the con-
nection socket at the rear of the
base until it clicks into place and
feed under the cable protection.
¤ Insert the power cable for the power
adapter into the connection socket
at the rear of the base and rotate
the right-angle plug under the cable
protection.
¤ Connect the power adapter .
¤ Connect the phone jack .
1
2
3
4
4
3
2
1
Notes
u The power adapter must always be connected, as the phone will not operate without a
power supply.
u Use only the supplied power adapter and phone cord. Pin connections on telephone
cables can vary (pin connections,
¢ page 65).
approx.
2 mm
29 mm
¤ Connect the flat plug to the charging cradle .
¤ Plug the power adapter into the power socket .
If you have to remove the plug from the charging cradle
again:
¤ Disconnect the power adapter from the mains
power supply.
¤ Press the release button and disconnect the
plug .
1
2
3
4
2
1
3
4