Operation Manual

Gigaset C530 / LUG ZAF en / A31008-M2512-W101-1-7619 / sms.fm / 6/26/13

Template Borneo, Version 1, 21.06.2012

SMS (text messages)

The following prerequisites must be satisfied if you wish to use the SMS function.

Prerequisites:

u Calling Line Identification is enabled.

u Your network provider supports SMS within the fixed line network.

u The call number of at least one SMS centre must be entered (

¢ page 49).

u To receive SMS messages, you must be registered with your network provider.

This usually occurs automatically when you send your first text message.

Writing and sending SMS

Your system can send a linked SMS (made up of up to four individual SMS messages) as one

message. Linking occurs automatically.

¤ Ë ¤ OK ¤ New SMS ¤ OK

¤ Entering SMS text (enter text and special characters, ¢ page 18).

¤ Press the Answer call key c or ¤ Options ¤ q Send ¤ OK

¤ Send SMS to: Select number with dialling code (even if you are in that area) from the

directory or enter directly.

¤ Send

Temporary storing of an SMS (draft message list)

You can temporarily store, change later and send SMS messages.

¤ Enter the text. ¤ Options ¤ q Save ¤ OK

Opening an SMS from the draft message list

v ¤

¤ OK ¤ q Draft ¤ OK ¤ q Select entry. ¤ OK

You can

¤ Read: read, then change or send the SMS

Or:

¤ Options: send, change, delete the SMS or delete the entire draft message list.

Please note

u If the SMS text cannot be displayed in full, you can navigate within the text using q.

u The cursor can be placed within a text at the required position using p.

u In the case of an external call, or if you interrupt writing by more than 2 minutes, the text

is automatically saved in the draft message list. If the memory is full, the SMS is deleted.

u Sending SMS can result in additional costs. Please consult your provider.