Operation Manual

9
Gigaset A415 / ZAF / A31008-M2501-W101-1-7619 / Penguini.fm / 09.07.2013
Template Bali, Version 1, 16.02.2012
Using other functions
q (select entry) ¤ §Menu§
The following functions can be selected with q:
Calling back a caller from the calls list
’ ¤ q CallsList 01+02 ¤ §OK§ ¤ q (select entry) ¤ c
Network mailbox list
You can use these lists to listen to messages on the network mailbox (¢ page 9).
New messages can only be deleted during playback of message body.
Network mailbox
The network mailbox is the answering machine in your provider's telephone network. More information is available from
your provider. You cannot use the network mailbox unless you have requested it from your provider.
In order to use the network mailbox quickly and easily via the network mailbox list (¢ page 8), the menu (¢ page 18)
and to use fast access (¢ page 1), you will need to enter the number in your phone:
§Menu§ ¤ q Answer Machine ¤ §OK§ ¤ q Net Mailbox ¤ ~ (enter number) ¤ §OK§
Locating a handset (paging)
You can locate your handset using the base station.
¤ Briefly press the registration/paging key on the base station (¢ page 1).
All handsets will ring at the same time (paging), even if the ringers are switched off.
Ending paging: Briefly press the registration/paging key on the base station (¢ page 1) or press the talk key c or the
end call key a on the handset.
Registering handsets manually
You can register up to four handsets on your base station. Each additional handset must be registered on the base sta-
tion in order for it to work properly!
Registration takes approx. 1 minute. Once the registration process has been completed successfully, the display briefly
shows
HS registered and returns to idle status. Handsets are assigned the lowest available internal number (1-4). If the
internal numbers 1–4 are already assigned to other devices, the number
4 will be overwritten.
De-registering handsets
You can de-register all other registered handsets from each of the registered Gigaset handsets.
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q De-register HS ¤ q Select the internal party you wish to de-
register. The handset you are currently using is indicated by <.
¤ §OK§ ¤ Enter the base station system PIN (default setting:
0000)
¤ §OK§
Delete Entry Delete current entry.
Copy to Dir. Copy an entry to the directory.
Date/Time Call date and time (if set).
Status New Call: new missed call. Old Call: entry already read.
Delete List Warning! All old and new entries will be deleted.
1) On the handset
§Menu§ ¤ q Settings ¤ §OK§ ¤ q Handset ¤ §OK§ ¤ q Register HS ¤ Enter the base station system PIN (default set-
ting: 0000) ¤ §OK§ ¤ Registering is displayed.
2) On the base station
Within 60 seconds, press and hold the registration/paging key on the base station (¢ page 1) for approx. 3 seconds.