Operation Manual

9
AS180 / IM-Nord EN / A31008-M2002-R201-2-9W19 / main.fm / 17.01.2011
Registering handsets
You can register up to four handsets on your base sta-
tion (Gigaset AS18H) recommended).
For automatic registration of handsets to
Gigaset AS180
¢ page 5.
Manual registration of handsets to
Gigaset AS180
1. On the handset: MENU ¢ Settings ¢ OK
¢ Handset ¢ OK ¢ Register HS ¢ OK ¢ Enter
the system PIN of the base station (default is 0000)
¢ OK.
Registering flashes in the display.
2. On the base station: wit
hin 60 seconds of entering
the system PIN, press and hold the registration/pag-
ing key (
¢ page 1) (min. 3 seconds).
Registration takes approx. 1 minute.
De-registering handsets
Handsets can only be de-registered by resetting the
base station to its default settings. This will also reset
other settings
¢ page 10.
If you have only re
gistered handsets for other GAP-
compatible devices, these can only be de-registered
with a hardware reset
¢ page 10.
Using several handsets
Making internal calls
Internal calls are free calls to other handsets that are
registered to the same base station.
To make a call to other handsets, press
◆ INT ¢ ~ (1...4, enter internal number of the
handset), the handset is called or
◆ INT ¢ star key P, all handsets are called.
When a participant answers you can speak to them.
To
end the call, press the end call key
a.
Internal consultation call/connecting
a call
You are in conversation with an external participant.
Press the
INT key and call one or all handsets. The
external participant hears the hold music.
◆ Before the internal participant has answered,
press the end call key
a; the call is diverted to the
participant who answers the call.
◆ After the internal participant has answered, you
can talk to him. Press the end call key
a; the call is
diverted, or press the display key
”; you are
reconnected to the external participant.
Listening in to an external call
You are conducting an external call. An internal par-
ticipant can listen in on this call and take part in the
conv
ersation (conference).
Precondition: Th
e
Listening in function must be acti-
vated.
Activating/deactivating listening in
MENU ¢ Settings ¢ OK ¢ Base ¢ OK
¢ Listening in ¢ OK (‰ = on)
Internal listening in (conference)
You want to listen in to an existing external call.
Press and hold the
c key. You can listen in to the call.
All participants hear a signal tone.
To end:
press the end call key
a. All participants hear
a signal tone.
If the first
internal participant presses the end call key
a, the handset that has "listened in" remains con-
nected to the external participant.
Please note:
Each additional handset must be registered on the
ba
se station in order for it to work properly!