Operation Manual

A39H
/
ARG
-en
/
A31008
-
M2257
-
U201
-
5
-
3P19
/
start
i
ng.
f
m
/
17
.
02
.
2012
7
Charge status of the batteries
The charge status is indicated by the top right display icon. After the initial charg-
ing procedure a complete charging to full capacity takes at least 18 hours.
◆ U battery full
◆ e steady: mediuim capacity
◆ e flashes: batteries almost flat
◆ U flashes: charging when the handset is in the charging cradle
Setting the date and time
Set the date and time so that the correct date and time can be assigned to incom-
ing calls, and so that the alarm can be used.
MENU ¢ Settings ¢ OK ¢ Date/Time ¢ OK
¢ Date: ¢ ~ (enter the day, month and year in 6-digit format) ¢ OK
¢ Time: ¢ ~ (enter hours and minutes in 4-digit format) ¢ OK
¢ a (press to return to idle status)
Display in idle status
Once the phone is registered and the time set, the idle
display is shown as in this example.
If more than one handset is registered, the internal
number
of the handset is
shown in the upper left cor-
ner.
Activating/deactivating the handset
Press and hold the a key to activate or deactivate the handset.
If you place a deactivated handset in the base station or charging cradle, it will
automatically acti
vate.
Your phone is now ready for use.
If you have any questions about using your phone, please read the tips on trouble-
shooting ("Questions and answers"
¢ page 12).
Please note
When entering the time and date, you can m
ov
e the position of an entry to the
left or right by pressing the control button up or down.
1 U
11.12. 11:56
INT MENU