Operation Manual

43
Maxwell Basic / LUG CA-IE-UK-US-International en / A31088-N4002-R101-4-7619 / web_configurator.fm / 1/10/18
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Configuring other settings with the Web configurator
For the Line, BLF and FAC key assignments, you can select the LED colour.
¤ Select the required colour next to LED colour.
For key assignments Line and BLF, the selection Standard means:
Save the settings: Set
Quick Dial Assigns a number to the function key.
¤ Select the desired connection Enter the Target number
BLF The phone is connected to a PABX which supports this function and the
number
is assigned to a group.
A function key that is configured as BLF (Busy Lamp Field) indicates the status
of
a shared line. It is configured on all extensions of the group. The keys flash on
all extensions when a call arrives, and light up when the line on any extension
is busy.
¤ Select the desired connection Enter the Target number
Accept incoming calls: Enter Ca
ll Pickup Code
SIP URI Assigns the function key a SIP URI (Internet phone number in SIP notation).
¤ Enter the SIP URI (e.g. sip:Susan.Brown@211.122.10.15)
Call Divert Enable the call divert set up previously (
p. 39).
¤ Select the Line for which the call divert is set up
DTMF Assigns the function key a number dialled
using DTMF. This is required for
example for querying and controlling certain network mailboxes via digit
codes or for remote operation of the local answer machine.
¤ Enter the number to be dialled using DTMF signalling.
Action URL Assigns an Action URL to the function key. An Action URL is used by the phone
t
o communicate with a Web server application.
¤ Enter the URL in the text field
SIP INFO Assigns the function key a SIP INFO call to the PABX. The following calls can be
assi
gned.
Record Start/stop call recording
Divert CFU Divert all calls
Divert CFB Divert calls when the phone is busy
Divert CFNR Divert calls when they are not accepted
Day/Night Enable/disable day/night activation
FAC (Function Access Code) The key sends a code to the phone system or provider
t
o enable/disable a function or service.
¤ In text fields Enable Service/Disable Service, enter the codes for enabling/
disabling the function or service . . . Pressing once sends the code in Enable
Service, pressing once again sends the code in Disable Service.
Yellow Not registered / error
Green Free
Permanently red Conversation ongoing
Flashing red Incoming call