Operation Manual

32
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Basic settings
Maxwell Basic / LUG CA-IE-UK-US-International en / A31088-N4002-R101-4-7619 / settings.fm / 1/10/18
Call volume
The call volume (volume during a call) can be set on 10 levels separately for the receiver, speaker
and a headset connected.
¤ . . . Use to select Settings OK Audio Settings OK Call
Volume OK Select Handset, Handsfree or Headset
. . . The current volume is displayed graphically
¤ . . . Use to select the required volume Save
Display
Screensaver (digital clock)
You can display a digital clock as the screensaver for the phone’s display when in idle status.
¤ . . . Use to select Settings OK Display OK Screensaver . . . then
Exiting the screensaver
¤ Press any key briefly . . . the display changes to idle status
Brightness
The brightness can be set at 10 levels.
¤ . . . use to select Settings OK Display OK Brightness OK . . .
the current setting is shown graphically . . . use to select the brightness required
Save
Contrast
The contrast can be set at 9 levels.
¤ . . . use to select Settings OK Display OK Contrast OK . . .
the current setting is shown graphically . . . use to set the required contrast Save
Colour scheme
The display can appear in a range of colour combinations.
¤ . . . use to select Settings OK Display OK Colour Scheme OK
. . . use to select required colour scheme Select ( = selected)
Changing the volume during a call:
¤ Press the volume keys (for louder) or (for quieter)
Switch off: . . . Use to select Off Save
Switch on: . . . Use to select the time the display spends in idle status before
the screensaver becomes active (10, 20, 30, 40, 50 or 60 minutes)
Save the selection:
¤ Save