Operation Manual

15
Maxwell Basic / LUG CA-IE-UK-US-International en / A31088-N4002-R101-4-7619 / telephony.fm / 1/10/18
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Making calls
Incoming calls
An incoming call is indicated by ringing, by a display on the screen and by the flashing Status
LED.
The display shows
Protection from incoming calls
Activating/deactivating the ringtone
An incoming call is not signalled by ringing, but is displayed on the screen.
Switching the ringtone on/off: Press and ho
ld the Star key
Ringtone is switched off: the follo
wing icon appears on the display
Switching the alert tone (beep) on/off
Switch on an alert tone (beep) instead of the ringtone:
¤ Press and hold the Star key press Beep within 3 seconds . . . the following icon
appears in the status line
Switching off the alert tone: Press and hold the Star key
Switching the "Do not disturb" function on and off
Incoming calls are not signalled.
Switching "Do not disturb" on or off: Press the Do not disturn key
"Do not disturb" is switched on: the Do not disturb key is illuminated, the display shows
"Do not disturb" active
• the line on which the call is coming in on
• the caller's name if it has been stored in the
directory
• the caller's number if it has been transmitted
( p. 14)
Accepting the call:
¤ lift the handset
Switching the ringtone off:
¤ Silence
Rejecting the call:
¤ Reject
When a call comes in, the system looks for a matching entry in the local directory. If
the number is not found there, other directories are searched, if any have been
configured.
Ringtone silencing for anonymous calls: p. 31.
1 IP1
Peter Smith
004989123456789
Reject Silence
) (
)(