User's Manual
Table Of Contents
- Gigaset S790/S795 - more than just a telephone
- The handset at a glance
- Display symbols
- The base at a glance
- Contents
- Safety precautions
- First steps
- Using the phone
- Menu overview
- Making calls
- Using the directory and lists
- Operating the Gigaset S795 base answering machine
- Using the network mailbox
- ECO DECT
- Setting an appointment (calendar)
- Setting the alarm clock
- Using multiple handsets
- Using a handset as a room monitor
- Handset settings
- Quick access to numbers and functions
- Changing the display language
- Setting the display
- Activating/deactivating auto answer
- Changing the speaker/earpiece volume
- Changing ringtones
- Resource Directory
- Activating/deactivating advisory tones
- Setting long-distance and area codes
- Restoring the handset default settings
- Setting the base
- Connecting the base to the PABX
- Accessories
- Mounting the base on the wall (Gigaset S790 only)
- Mounting the charger on the wall
- Troubleshooting
- Appendix
- Additional functions via the PC interface
- FCC / ACTA Information
- Service (Customer Care)
- Index
62
Appendix
Gigaset S790/S795 / USA-CAN EN / A31008-M2121-R301-1-3S19 / appendix.fm / 28.07.2009
Version 4, 16.09.2005
Gigaset S795 only:
Appendix
Caring for your telephone
¤ Wipe the base, charger and handset
with a damp cloth (do not use solvent)
or an antistatic cloth.
Never use a dry cloth as this can cause
static.
Contact with liquid
If the handset should come into contact
with liquid:
1. Switch the handset off and remove
the battery immediately.
2. Allow the liquid to drain from the hand-
set.
3. Pat all parts dry, then place the handset
with the battery compartment open
and the keypad facing down in a dry,
warm place for at least 72 hours (not
in a microwave, oven etc.).
4. Do not switch on the handset again
until it is completely dry.
When it has fully dried out, you will usu-
ally be able to use it again.
No time is specified for a message in the call
list.
Date and time have not been set.
¥ Set the date and time (¢ page 15).
The answering machine announces "PIN is
incorrect" during remote operation.
1. You have entered the wrong system PIN.
¥ Enter the system PIN again.
2. The system PIN is still set to 0000.
¥ Set the system PIN to something other
than 0000 (¢ page 57).
The answering machine is not recording
any messages/has switched over to answer
only.
Its memory is full.
¥ Delete old messages.
¥ Play back new messages and delete.
Exclusion of liability
Some displays may contain pixels (pic-
ture elements), which remain acti-
vated or deactivated. As a pixel is made
up of three sub-pixels (red, green,
blue), it is possible that pixel colours
may vary.
This is completely normal and does not
indicate an error.
!