User's Manual
Table Of Contents
- Gigaset S790/S795 - more than just a telephone
- The handset at a glance
- Display symbols
- The base at a glance
- Contents
- Safety precautions
- First steps
- Using the phone
- Menu overview
- Making calls
- Using the directory and lists
- Operating the Gigaset S795 base answering machine
- Using the network mailbox
- ECO DECT
- Setting an appointment (calendar)
- Setting the alarm clock
- Using multiple handsets
- Using a handset as a room monitor
- Handset settings
- Quick access to numbers and functions
- Changing the display language
- Setting the display
- Activating/deactivating auto answer
- Changing the speaker/earpiece volume
- Changing ringtones
- Resource Directory
- Activating/deactivating advisory tones
- Setting long-distance and area codes
- Restoring the handset default settings
- Setting the base
- Connecting the base to the PABX
- Accessories
- Mounting the base on the wall (Gigaset S790 only)
- Mounting the charger on the wall
- Troubleshooting
- Appendix
- Additional functions via the PC interface
- FCC / ACTA Information
- Service (Customer Care)
- Index
57
Setting the base
Gigaset S790/S795 / USA-CAN EN / A31008-M2121-R301-1-3S19 / registr_sett.fm / 28.07.2009
Version 4, 16.09.2005
Protecting against
unauthorized access
Protect the system settings of the base
with a PIN known only to yourself. The sys-
tem PIN must be entered when, for exam-
ple, registering/de-registering a handset
to/from the base or when restoring the
default settings.
Changing the system PIN
You can change the 4-digit system PIN set
on the base (default setting: 0000) to a 4-
digit PIN known only by you.
Gigaset S795: Setting a system PIN facili-
tates remote operation of the answering
machine (¢ page 41).
v ¢
Ï
¢ System ¢ System PIN
~ Enter the current system PIN
and press
§OK§.
~ Enter your new system PIN
and press
§OK§.
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base to the original code
0000:
1. Disconnect the power cable from the
base.
2. Hold down the registration/paging key
on the base while reconnecting the power
cable to the base.
3. Hold down the key for at least 5 sec-
onds.
4. The base has now been reset and the
system PIN set to 0000.
Resetting the base to the
factory settings
When the settings are restored:
u Date and time are retained
u Handsets are still registered
u Eco Mode is activated deactivated,
u The system PIN is not reset.
v ¢
Ï
¢ System ¢ Base Reset
~ Enter the system PIN and
press
§OK§.
§Yes§ Press the display key.
Please note
All handsets are de-registered and
must be re-registered. All settings are
reset to the factory settings.
•
•