User's Manual

ManualsBrandsGigaset Communications ManualsElectronicsUPCS Phone

Table Of Contents

Gigaset S790/S795 - more than just a telephone
The handset at a glance
Display symbols
The base at a glance
Contents
Safety precautions
First steps
- Checking the package contents
- Setting up the base and charger (if included)
- Connecting the base
- Connecting the charger (if included)
- Setting up the handset
- Setting the date and time
- Setting up area codes
- Connecting the headset
- Connecting the USB data cable
- What would you like to do next?
Using the phone
- Control key
- Display keys
- Keys on the keypad
- Side keys
- Correcting incorrect entries
- Using the menus
- Activating/deactivating the handset
- Activating/deactivating the keypad lock
- Using this guide
Menu overview
Making calls
- Making an external call
- Ending a call
- Accepting a call
- Using Caller ID
- Using the speaker mode
- Switching to mute
Using the directory and lists
- Directory
- Redial list
- Answering machine list (Gigaset S795 only)
- Call lists
- Opening lists with the message key
- List of missed alarms
Operating the Gigaset S795 base answering machine
- Operating via the handset
- Activating/deactivating call screening
- Setting the recording parameters
- Resetting fast access for the answering machine using key 1
- Operating when on the move (remote operation)
Using the network mailbox
- Configuring fast access for the network mailbox
- Viewing the network mailbox message
ECO DECT
Setting an appointment (calendar)
- Displaying missed appointments, anniversaries
Setting the alarm clock
Using multiple handsets
- Registering handsets
- De-registering handsets
- Locating a handset ("Paging")
- Changing the base
- Making internal calls
- Listening in to an external call
- Changing the name of a handset
- Changing a handset's internal number
Using a handset as a room monitor
Handset settings
- Quick access to numbers and functions
- Changing the display language
- Setting the display
- Activating/deactivating auto answer
- Changing the speaker/earpiece volume
- Changing ringtones
- Resource Directory
- Activating/deactivating advisory tones
- Setting long-distance and area codes
- Restoring the handset default settings
Setting the base
- Changing the Gigaset S795 base ringtones
- Activating/deactivating music on hold
- Protecting against unauthorized access
- Resetting the base to the factory settings
Connecting the base to the PABX
- Dialing modes and recall
- Setting pauses
- Switching temporarily to tone dialing (DTMF)
Accessories
Mounting the base on the wall (Gigaset S790 only)
Mounting the charger on the wall
Troubleshooting
Appendix
- Caring for your telephone
- Contact with liquid
- Specifications
- Writing and editing text
Additional functions via the PC interface
- Industry Canada Certification
FCC / ACTA Information
- Safety precautions
Service (Customer Care)
- End-user limited warranty
Index

First steps

Gigaset S790/S795 / USA-CAN EN / A31008-M2121-R301-1-3S19 / starting.fm / 28.07.2009

Version 4, 16.09.2005

Connecting the headset

After removing the plastic cover, you can connect a

headset to the left-hand side of your telephone with the

2.5 mm jack connector. HAMA and Plantronics M40,

MX100 and MX150 headsets are all suitable.

The headset volume corresponds to the settings for the

handset volume (

¢ page 53).

After using the headset, replace the plastic cover to

enable optimum sound in speaker mode.

A compatibility list of tested headsets can be found on

the Internet at:

www.plantronics.com/productfinder

Connecting the USB data cable

You can connect a standard USB data cable with a mini-B connector to the back

of your handset to connect the handset to a PC (¢ page 64).

¤ Remove the belt clip (if attached)

(¢ page 13).

¤ Remove the battery cover

(¢ page 12).

¤ Connect the USB data cable to the USB

socket 1.

Warning

Do not charge the handset in charging unit or base while the headset is

connected.