User's Manual

207
FCC / ACTA Information
S675IP / USA-CAN eng / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 30.04.2009
Version 8, 03.09.2008
FCC / ACTA Information
Warning: Changes or modifications to this unit not expressly approved by Gigaset Com-
munications USA LLC could void the FCC authority to operate the equipment. This
includes the addition of any external antenna device.
This equipment complies with Part 68 of the FCC rules and the requirements adopted by
the ACTA. On the bottom of the base station is a label that contains, among other infor-
mation, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number
must be provided to the telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68 rules and requirements adopted
by the ACTA. A compliant telephone cord and modular plug is provided with this product.
It is designed to be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
The REN is used to determine the number of devices that may be connected to a tele-
phone line. Excessive RENs on a telephone line may result in the devices not ringing in
response to an incoming call. In most but not all areas, the sum of RENs should not
exceed five (5.0). To be certain of the number of devices that may be connected to a line,
as determined by the total RENs, contact the local telephone company. For products
approved after July 23, 2001, the REN for this product is part of the product identifier that
has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown
on the label.
A copy of the supplier's Declaration of Conformity (SDoC) is available at this Internet
address: www.gigaset.com/docs.
If this equipment causes harm to the telephone
network, the telephone company will
notify you in advance, that temporary discontinuance of service may be required. But if
advance notice isn’t practical, the telephone company will notify the customer as soon
as possible. Also, you will be advised of your right to file a complaint with the FCC if you
believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or
procedures that could affect the operation of the equipment. If this happens the tele-
phone company will provide advance notice in order for you to make necessary modifi-
cations to maintain uninterrupted service. If you experience trouble with this telephone
system, disconnect it from the network until the problem has been corrected or until you
are sure that the equipment is not malfunctioning.
If trouble is experienced with this equipment, for repair or warranty information, please
contact Support at 1-866-247-8758. If the equipment is causing harm to the telephone
network, the telephone company may request that you disconnect the equipment until
the problem is resolved. This equipment is of a type that is not intended to be repaired
by the Customer (user).
This telephone system may not be used on coin service provided by the telephone com-
pany. Connection to party line service is subject to state tariffs. Contact the state public
utility commission, public service commission or corporation commission for informa-
tion. Privacy of communications may not be ensured when using this phone.
If your home has specially wired alarm equipment connected to the telephone line,
ensure the installation of this equipment does not disable your alarm equipment. If you
have questions about what will disable alarm equipment, consult your telephone
company or a qualified installer.
This telephone system equipment has been tested and found to comply with the limits
for Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including interference that may cause
undesired operation. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. Some cordless telephones operate at
frequencies that may cause interference to nearby TV’s and VCR’s; to minimize or prevent