User's Manual

Table Of Contents
162
Setting the phone with the PC
S675IP / USA-CAN eng / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 30.04.2009
Version 8, 03.09.2008
Saving settings on the phone
¤ Select
Set to save the changes.
The
Connections list is shown after saving (£
Figure 2 on Page 154).
To discard the changes:
¤ Select the
Cancel button.
If all fields are to be reset to the default settings:
¤ Select the
Delete button.
Fields without default settings are empty.
Activating a new connection
If you have configured a new VoIP connection, you must also activate it.
In the
Connections list:
¤ Activate the relevant option in the Active column ( = activated).
Your phone will register itself with the VoIP provider using the relevant access
data. Refresh the Web page (e.g. by pressing F5).
The
Status Registered column will appear if registration was successful. You can
now be reached on this VoIP phone number.
Configuring the fixed line connection
You can assign a name to your fixed line connection. This name is used to dis-
play the connection on the handset and the Web configurator interface, e.g.
during allocation of send and receive numbers (£
Page 168), for the call dis-
play (£ Page 50).
¤ Open the following Web page:
Settings ¢ Telephony ¢ Connections.
¤ Select the
Edit button in the Fixed Line Connection area.
¤ Enter your fixed line network number or the name of your choice (maximum
16 characters) for your fixed line connection in the
Connection Name or
Number
field. The default is "Fixed Line".
Please note
If you do not make any entries for a longer period, the connection to the Web
configurator is automatically terminated. Unsaved entries are lost. If neces-
sary, save intermittently. You can subsequently continue the entry and make
changes if necessary.
Please note
Once the new entry has been made, the VoIP phone number is assigned to
each handset and the integrated answering machine as a receive number. For
how to adjust the assignment,
£
Page 168.