User's Manual
Table Of Contents
- Congratulations
- The handset at a glance
- Contents
- Safety precautions
- Gigaset S45 - a handset with many extras
- First Steps
- Making calls
- Operating the handset
- Using the directory and lists
- Directory and call-by-call list
- Storing a number in the directory
- Storing a number in the call-by-call list
- Selecting entries in the directory and call-by-call list
- Dialing from the directory/call-by-call list
- Managing entries in the directory/call- by-call lists
- Using quick dial keys
- Sending the directory/call-by-call list to another handset
- Storing anniversaries in the directory
- Last number redial list
- Opening lists with the message key
- Directory and call-by-call list
- Using a handset as a room monitor
- Handset settings
- Appendix
- Safety precautions
- Notes on the operating instructions
- Accessories
- Index
17
Handset settings
Gigaset S45 / USA EN / A31008-M1754-R101-1-6Z19 / start_guide_time.fm / 30.3.06
Adjusting the loudspeaker
volume
You can set the loudspeaker volume for
handsfree talking to five different levels
and the earpiece volume to three different
levels. You can only make these adjust-
ments during a call.
The handsfree volume can only be
adjusted when this function is set.
You are conducting an external call.
t Open menu.
r Select volume.
§Save§ Press display key if necessary
to save the setting perma-
nently.
If t is assigned a different function:
§Options§ Open menu.
Volume Select and press §OK§.
Configure setting (see above).
Changing ringtones
u Volume:
You can choose between five volumes
(1–5; e.g. volume 2 = ˆ) and
the "Crescendo" ring (6; volume
increases with each ring =
‰).
u Ringtones:
You can choose between 15 different
melodies.
You can configure the following functions
with different ringtones:
u Ext. Calls: For external calls
u Internal Calls: For internal calls
u All: The same for all functions
Settings for individual functions
Set the volume and melody depending on
the type of signaling required.
v
¢ Ð ¢ Audio Settings ¢
Ringer Settings
q Setting, for example select
Ext. Calls and press
§OK§.
¤ Change multiple line input:
r Set volume (1–6).
s Scroll to the next line.
r Select melody.
§Save§ Press the display key to con-
firm the prompt.
In idle status, you can also open the menu
Ringer Settings by pressing t briefly.
Settings for all functions to ring the
same
v ¢ Ð ¢ Audio Settings ¢
Ringer Settings ¢ All
¤ Set volume and ringtone (see "Settings
for individual functions").
§Yes§ Press the display key to con-
firm the prompt.
a Press and hold (idle status).
Activating/deactivating the ringtone
Before answering a call or while your
handset is in idle status, it is possible for
you to cancel the ringtone permanently or
for the current call. The ringtone cannot
be re-activated while an external call is in
progress.
Deactivating the ringtone permanently
* Press the star key and hold
until you can no longer hear
the ringtone.
The Ú icon appears in the display.
Re-activating the ringtone
* Press and hold the star key.