User's Manual
Table Of Contents
- Safety precautions
- Package contents
- Connection overview
- Preparing the handset
- Inserting the supplied batteries and closing the battery cover
- Connecting the charger and charging the batteries
- Connecting the phone cord and power lead to the base
- Connecting the base to the fixed line network and mains power supply
- Connecting the base to the router (Internet)
- Connecting the PC to the router (optional)
- Connecting the base
- Connecting the base
- Configuring the VoIP connection
- Prerequisite for the following steps:
- You will need:
- Starting the configuration process
- Starting the VoIP wizard
- Entering an auto-configuration code
- Selecting a provider and loading provider data to the base
- Entering personal VoIP account data
- Starting the connection wizard
- Completing the installation
- Entering your name in the Gigaset.net directory
- Configuring the VoIP connection
- Configuring the VoIP connection
- Configuring the VoIP connection
- Configuring the VoIP connection
- Assigning the send/receive connection
- Assigning the send/receive connection
- Assigning the send/receive connection
- Assigning the send/receive connection
- Gigaset.net directory entry
- Making calls / operating the answering machine
- FCC / ACTA Information
- Safety precautions
- Service (Customer Care)
- Service (Customer Care)
- Service (Customer Care)
- Service (Customer Care)
- FCC / ACTA Information
Gigaset C590/595 IP / USA EN / A31008-M2215-R301-1-6043 / install_3pg.fm / 11/10/10
Version 5, 23.09.2008
8
Connecting the base
Connecting the base to the router (Internet)
Connecting the PC to the router (optional)
You can change the settings on the phone's base using a PC connected to your phone via the
router.
> Connect the PC network connection to a free LAN socket on your router.
Connect one Ethernet cable plug to
the LAN socket at the side of the base.
Insert the second Ethernet cable plug
into a LAN socket on the router.
Use the Ethernet cable supplied.
As soon as the cable connecting the phone and router is
plugged in and the router is switched on, the key lights up
on the front of the base (paging key).
Data protection notice: Further information about
saving Gigaset.net service data can be found at
www.gigaset.net/privacy-policy.
The procedure below requires that your phone is automatically assigned an IP address by the
router (i.e. DHCP is enabled on router and phone).
In exceptional cases (e.g. if DHCP is not enabled on the router) you will have to assign a static
IP address to the base for LAN access. You must enter this IP address on the handset before
carrying out the following steps. Further information on this can be found in the long user guide
(see enclosed CD).
The following handset menu can be used to make the entry:
v (Press right on the control key) ¢ Ï ¢ System ¢ Local Network ¢ (enter system PIN
if required)
5
A
B
A
B
6