User's Manual

Gigaset C590/595 IP / USA EN / A31008-M2215-R301-1-6043 / configuration_10pg.fm / 11/10/10
Version 5, 23.09.2008
17
Assigning the send/receive connection
On the Gigaset C595 IP:
You can then start the connection wizard for the three Gigaset answering machines. For each
answering machine, the following will be shown in the display:
Assign connections to answering machine ?
> Carry out steps a. to d. (see above) for the individual answering machines to assign individual
base connections to the answering machines.
Please note:
Each connection may only be assigned to one of the three integrated answering machines as a
receive connection. If you assign a receive connection to an answering machine and this connec-
tion is already assigned to another answering machine, the "old" assignment is deleted.
Completing the installation
After successfully configuring the settings, Connection assignment complete is displayed briefly.
Afterwards, the handset returns to idle status (an example of the display in idle status):
You can configure five additional VoIP connections (VoIP phone numbers) on
your Gigaset. The long user guide for your phone (see enclosed CD) contains
detailed information on setting up the device, configuring new connections and
operating the phone, as well as possible solutions to frequently asked questions
and common problems.
To ensure that you can always be reached via the Internet, the router must be permanently con-
nected to the Internet.
i V
07:15
INT 1 14 Oct
Calls
The following are displayed:
Reception between the base and the handset:
good to low: Ð iÑÒ, no reception: ¼ (red)
Charge status of the batteries:
yy{{ (Empty to full)
yFlashes red: batteries almost empty
xyx{x{ (Charging)
INT 1: Internal name of the handset