User's Manual

67
Appendix
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 16.04.2010
Version 4, 16.09.2005
Base power consumption
General specifications
Pin connections on the telephone
jack
Writing and editing text
The following rules apply when writing text:
u Multiple letters and characters are
assigned to each key between Q and
O as well as * and #.
u Control the cursor with uvts.
u Characters are inserted at the cursor posi-
tion.
u Press the display key
§Delete§ to delete the
character to the left of the cursor.
u The first letter of the name of directory
entries is automatically capitalised and
followed by lower case letters.
Setting upper/lower case or digits
Repeatedly press the hash key # to change
the text input mode.
When the mode is switched, the active
mode is indicated at the bottom left of the
screen.
C300 C300A
In standby mode* approx.
0.7 W
approx.
0.7 W
Base in standby mode ** < 0.5 W < 0.5 W
During a call approx.
0.5 W
approx.
0.5 W
*) Charged handset in base
**)Handset not in base
DECT standard Is supported
GAP standard Is supported
No. of channels 60 duplex channels
Radio frequency range 1880–1900 MHz
Duplex method Time multiplex,
10 ms frame length
Channel grid 1728 kHz
Bit rate 1152 kbit/s
Modulation GFSK
Language code 32 kbit/s
Transmission power 10 mW, average power
per channel
Range up to 300 m outdoors,
up to 50 m indoors
Base power supply 230 V ~/50 Hz
Environmental condi-
tions in operation
+5°C to +45°C, 20% to
75% relative humidity
Dialling mode DTMF (tone dialling)/
PD (pulse dialling)
123 Writing digits
Abc Upper case *
abc Lower case
* First letter in capitals, all others in lower case
1unused
2unused
3a
4b
5unused
6unused
3
2
1
4
5
6