User's Manual

38
Operating the Gigaset A510A base answering machine
Gigaset A510-A510A / USA en / A31008-M2202-R301-1-3S19 / answering_m.fm / 25.08.2011
Version 4, 16.09.2005
Setting the recording
parameters
The answering machine has already been
preset at the factory. You can configure indi-
vidual settings via the handset.
Setting the message length
You can set the maximum message length:
1 Minute, 2 Minutes, 3 Minutes or
Unlimited.
§Menu§ ¤ Voice Mail ¤ Message Length
q Select message length and
press
§OK§ (³= selected).
Setting up ring delay
You can set when you want the answering
machine to accept a call:
Immediately, 10 sec, 18 sec, 30 sec or Auto.
§Menu§ ¤ Voice Mail ¤ Ring Delay
q Select time and press §OK§
(
³= selected).
Information about ring delay
In Auto mode, the following applies for ring
delay:
u If there are no new messages, the answer-
ing machine answers a call after 18 sec-
onds.
u If there are new messages, the answering
machine answers a call after 10 seconds.
When operating remotely (¢ page 39), you
can then tell after approx. 15 seconds that
there are no new messages (otherwise the
answering machine would have already
accepted your call). There are no call charges
if you hang up now.
Changing the language
for the voice prompt
and pre-recorded
announcement
§Menu§ Open main menu.
P#Q5#21
Enter digits and press
Q
§OK§ To set English.
1 §OK§ To set French.
2 §OK§ To set Spanish.
Resetting fast access for the
answering machine using
key 1
To access the answering machine, simply
press and hold the 1 key – you do not have
to select it via the menu.
The integrated answering machine has
already been preset at the factory. However,
if you have set the network mailbox for fast
access (¢ page 40), you can change this set-
ting.
§Menu§ ¤ Voice Mail ¤ Set Key 1
Answering Machine
Select and press
§OK§.
The setting for fast access applies to all regis-
tered handsets.