User's Manual

33
Using the directory and lists
Gigaset A510-A510A / USA en / A31008-M2202-R301-1-3S19 / direct_charges.fm / 25.08.2011
Version 4, 16.09.2005
The number of new entries is displayed
under the corresponding icon.
After pressing the message key f, you can
see all lists containing messages and the
network mailbox list.
The list is displayed with the number of new
entries (1) and the number of old, read
entries (2) (example):
Select a list with q. To open, press
§OK§.
Activating/deactivating flashing
message key
You can specify whether you want the mes-
sage key f to flash for new messages
(default setting). Proceed as follows:
¤ Press the following keys in sequence:
v ¤ P#Q5#M
You will see:
¤ Press one of the following keys to select
the type of message:
Your selection is displayed (e.g., 5 for
missed calls), the current setting flashes:
¤ Press Q or 1 to determine the setting
for new messages:
Your selection is displayed (e.g., 1):
¤ Press the display key
§OK§.
Answering machine list
(Gigaset A510A only)
You can use the answering machine list to
listen to the messages that are on the
answering machine (¢ page 36).
Calls list
Prerequisite: Caller ID (CID) (¢ page 27)
Depending on the type of list, the calls list
contains the last 25 numbers of
u All calls
– Accepted calls
– Unanswered calls
– Calls recorded by the answering
machine (Gigaset A510A only)
u Missed calls
– Unanswered calls and
– Calls not recorded by the answering
machine (Gigaset A510A only)
In idle status, you can open the calls list by
pressing the message key f.
Please note
If calls are saved in the network mailbox,
you will receive a message if the list type
has been set accordingly (see your net-
work provider user guide).
5 for missed calls
Or M for messages on the answer-
ing machine (Gigaset A510A
only)/network mailbox
à ™
03 01
Calls List:
02+03
Back
W
OK
2
1
97
Q The message key flashes (it
goes off when the key is
pressed)
Or 1 The message key does not
flash
975 SET:
[
0
]
975 SET:
[
1
]