User's Manual

BIOS Setup
- 44 -
2-4 Tweaker
& CPU BCLK Frequency
Allows you to manually set the CPU base clock in 0.01 MHz increments. (Default: Auto)
Important: It is highly recommended that the CPU frequency be set in accordance with the CPU
specications.
& CPU Clock Ratio
Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU
being installed.
& CPU Mesh Ratio
Allows you to set the CPU Uncore ratio. The adjustable range is dependent on the CPU being used.
& AVX Offset
AVX offset is the negative offset of AVX ratio.
& AVX 512
 AllowsyoutocongureAVX512instructions.(Default:Auto)
Whether the system will work stably with the overclock/overvoltage settings you made is dependent
onyouroverallsystemcongurations.Incorrectlydoingoverclock/overvoltagemayresultindamage
to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced
users only and we recommend you not to alter the default settings to prevent system instability or
other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If
this occurs, clear the CMOS values and reset the board to default values.)