User's Manual

BIOS Setup
- 46 -
 Advanced Memory Settings
 Memory Subtimings
d Standard Timing Control, Advanced Timing Control, CAD Bus Setup Timing,
 CADBusDriveStrength,DataBusConguration
 Thesesectionsprovidememorytimingsettings.Therespectivetimingsettingscreensarecongurable
only when Memory Timing Mode is set to Manual. Note: Your system may become unstable or fail to boot
after you make changes on the memory timings. If this occurs, please reset the board to default values by
loading optimized defaults or clearing the CMOS values.
 SPD Info
Displays information on the installed memory.
& CPU Vcore/Dynamic Vcore(DVID)/VCORE SOC/Dynamic VCORE SOC(DVID)/CPU
VDD18/CPU VDDP/PCH_CLDO/PM_1VSOC/PM_1V8/DRAM Voltage (CH A/B)/DDRVPP
Voltage (CH A/B)/DRAM Termination (CH A/B)/DRAM Voltage (CH C/D)/DRAM
Termination (CH C/D)
These items allow you to adjust the CPU Vcore and memory voltages.