User Manual

Table Of Contents

- 4 -

Step2:

Afterthesystemreboot,enterBIOSSetupagain.ThenentertheSettings\IO Ports\RAIDXpert2 Conguration

Utility sub-menu(Figure3).

Step3:

OntheRAIDXpert2CongurationUtilityscreen,press<Enter>onArray ManagementtoentertheCreate

Arrayscreen.Then,selectaRAIDlevel(Figure4).RAIDlevelssupportedincludeRAID0,RAID1,andRAID

10(theselectionsavailabledependonthenumberoftheharddrivesbeinginstalled).Next,press<Enter>on

Select Physical DiskstoentertheSelect Physical Disksscreen.

Figure3

Figure4