User's Manual

BIOS Setup
- 49 -
& Resume by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
Wakeupday:Turnonthesystemataspecictimeoneachdayoronaspecicdayinamonth.
Wake up hour/minute/second: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
& Wake on LAN
Enables or disables the wake on LAN function. (Default: Enabled)
 IO Ports
& Initial Display Output
 SpeciestherstinitiationofthemonitordisplayfromthetheinstalledPCIExpressgraphicscard.
PCIe1Slot SetsthegraphicscardonthePCIEX16_1slotastherstdisplay.(Default)
PCIe2Slot SetsthegraphicscardonthePCIEX8_1slotastherstdisplay.
PCIe 3 Slot  SetsthegraphicscardonthePCIEX16_2slotastherstdisplay.
PCIe 4 Slot  SetsthegraphicscardonthePCIEX8_2slotastherstdisplay.
& PCIEX16_1 Bifurcation
Allows you to determine how the bandwidth of the PCIEX16_1 slot is divided. Options: Auto, x16, x4x4x4x4.
(Default: Auto)
& PCIEX8_1 Bifurcation
Allows you to determine how the bandwidth of the PCIEX8_1 slot is divided. Options: Auto, x8, x4x4.
(Default: Auto)
& PCIEX16_2 Bifurcation
Allows you to determine how the bandwidth of the PCIEX16_2 slot is divided. Options: Auto, x16, x4x4x4x4.
(Default: Auto)
& PCIEX8_2 Bifurcation
Allows you to determine how the bandwidth of the PCIEX8_2 slot is divided. Options: Auto, x8, x4x4.
(Default: Auto)
& Above 4G Decoding
Enables or disables 64-bit capable devices to be decoded in above 4 GB address space (only if your system
supports 64-bit PCI decoding). Set to Enabled if more than one advanced graphics card are installed and
their drivers are not able to be launched when entering the operating system (because of the limited 4 GB
memory address space). (Default: Disabled)