7VM400AM-RZ AMD Athlon™/Athlon™ XP/Duron™ Socket A Processor Motherboard User's Manual Rev. 1003 12ME-VM400AMRZ-1003 Copyright © 2005 GIGABYTE TECHNOLOGY CO., LTD Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in any from without the expressed, written permission of GBT. Trademarks Third-party brands and names are the property of their respective owners.
Mother Board 7VM400AM-RZ Oct. 7, 2004 Motherboard 7VM400AM-RZ Oct.
Preparing Your Computer Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Unplug your computer when working on the inside. 2. Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case. 3.
English Table of Contents Chapter 1 Introduction ................................................................................................. 5 Features Summary ................................................................................................................. 5 7VM400AM-RZ Motherboard Layout ...................................................................................... 7 Block Diagram ...............................................................................................
Features Summary CPU On-Board Floppy Socket A for AMD Athlon™ XP / Athlon™ / Duron™ processor 200/266/333/400MHz FSB Supports 1.4GHz and faster Northbridge : VIA KM400A Southbridge : VIA 8237 2 184-pin DDR DIMM sockets, supports up to 2GB DRAM (Max) Supports DDR400/DDR333 DIMM Supports only 2.5V DDR SDRAM 1 AGP slot supports 8X/4X(1.5V) mode 3 PCI slots support 33MHz & PCI 2.
English BIOS I/O Control Hardware Monitor Additional Features Overclocking Form Factor y y y y y y y y y y y y 7VM400AM-RZ Motherboard Licensed AWARD BIOS Supports Q-Flash™ ITE8705 CPU/System fan revolution detect CPU/System temperature detect System voltage detect CPU/System fan fail warning Supports @BIOS™ Supports EasyTune 4™ Over clock (CPU/DDR) by BIOS Over voltage (DDR/AGP) br BIOS Micro ATX size form factor, 24.3cm x 22.
English 7VM400AM-RZ Motherboard Layout 22.2 cm KB_MS FDD CPU_FAN VGA SOCKET A LAN IDE2 IDE1 BIOS SYS_FAN AGP DDR2 F_AUDIO DDR1 LINE_IN LINE_OUT MIC_IN USB VIA KM400A IT8705 24.
AMD-K7TM CPU VGA Port VIA KM400A AGPCLK 66MHz 200/266/333/400MHz DDR HCLK+/- (100/133/166/200MHz) NBGCLK66 MHz VT6103 66MHz V_Link 3 PCI CPUCLK+/- (100/133/166/200MHz) System Bus 200/266/333/400MHz FSB AGP 4X/8X RJ45 48 MHz 33 MHz 14.318 MHz BIOS PCI BUS 33MHz VIA VT8237 Game Port LPC BUS Floppy IT8705 AC97 Link LPT Port 24 MHz PCICLK (33MHz) PCICLK (33MHz) USBCLK (48MHz) 14.
English Hardware Installation Process To set up your computer, you must complete the following steps: Step 1- Set System Jumper (JP1) Step 2- Install the Central Processing Unit (CPU) Step 3- Install Memory Modules Step 4- Install Expansion Cards Step 5- Install I/O Peripherals Cables Step 2 Step 3 Step 5 Step 5 Step 4 Step 1 Step 1: Set System Jumper (JP1) The system bus frequency can be switched at 100/133/166/200MHz by adjusting system jumper (JP1). (The internal frequency depend on CPU.
English Step 2: Install the Central Processing Unit (CPU) Before installing the processor, adhere to the following warning: 1. Please make sure the CPU type is supported by the motherboard. 2. The processor will overheat without the heatsink and/or fan, resulting in permanent irreparable damage. 3. If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause improper installation. Please change the insert orientation. 4. Apply thermal grease between the processor and cooling fan. 5.
Before installing the memory modules, adhere to the following warning: 1. Please note that the DIMM module can only fit in one direction due to the one notch. Wrong orientation will cause improper installation. Please change the insert orientation. The motherboard has 2 dual inline memory module (DIMM) sockets. The BIOS will automatically detects memory type and size. To install the memory module, just push it vertically into the DIMM socket. The DIMM module can only fit in one direction due to the notch.
English Step 4: Install AGP Card 1. Read the relate AGP card's instruction document before install the AGP card into the computer. 2. If your AGP card has "AGP 4X/8X(1.5V) notch"(show below), please make sure your AGP card is AGP 4X/8X(1.5V). AGP 4X/8X notch 3. Please carefully pull out the small white-drawable bar at the end of the AGP slot when you try to install/ uninstall the AGP card. Please align the AGP card to the onboard AGP slot and press firmly down on the slot.
Connect the stereo speakers or earphone to this connector. MIC In jack a Microphone can be connect to MIC In jack. After installation of the audio driver, you are able to use 2/4/6-channel audio feature by software selection. You can connect "Front speaker" to "Line Out" jack, Connect "Rear speaker" to "Line In" jack and connect "Center/Subwoofer" to "MIC In" jack.
English 1) ATX (ATX Power) AC power cord should only be connected to your power supply unit after ATX power cable and other related devices are firmly connected to the mainboard. 1 11 20 10 Pin No. Definition Pin No. Definition 1 2 3.3V 3.3V 11 12 3.
Please connect the floppy drive ribbon cables to FDD. It supports 360K, 1.2M, 720K, 1.44M and 2.88M bytes floppy disk types. The red stripe of the ribbon cable must be the same side with the Pin1. 34 33 2 1 5) IDE1 / IDE2 (IDE1 / IDE2 Connector) Please connect first hard disk to IDE1 and connect CD-ROM to IDE2. The red stripe of the ribbon cable must be the same side with the Pin1. 40 39 IDE1 IDE2 2 1 6) SATA0 / SATA1 (Serial ATA Connector) Serial ATA can provide 150MB/s transfer rate.
PWR_LED is connect with the system power indicator to indicate whether the system is on/off. It will blink when the system enters suspend mode. 1 Pin No. 1 Definition MPD+ 2 3 MPDMPD- 8) F_PANEL (2 x 10 pins Connector) Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis front panel to the F_PANEL connector according to the pin assignment below.
If you want to use Front Audio connector, you must remove 5-6, 9-10 Jumper. In order to utilize the front audio header, your chassis must have front audio connector. Also please make sure the pin assigment on the cable is the same as the pin assigment on the MB header. To find out if the chassis you are buying support front audio connector, please contact your dealer. Please note, you can have the alternative of using front audio connector or of using rear audio connector to play sound. 1 2 9 10 Pin No.
English 12) CD_IN (CD In Connector) Connect CD-ROM or DVD-ROM audio out to the connector. Pin No. 1 1 Definition CD-L 2 3 GND GND 4 CD-R 13) COMB (COM B Connector) Be careful with the polarity of the COMB connector. Check the pin assignment carefully while you connect the COMB cable, incorrect connection between the cable and connector will make the device unable to work or even damage it. For optional COMB cable, please contact your local dealer. 2 1 10 9 Pin No.
Be careful with the polarity of the front USB connector. Check the pin assignment carefully while you connect the front USB cable, incorrect connection between the cable and connector will make the device unable to work or even damage it. For optional front USB cable, please contact your local dealer. Pin No.
English 18) BAT (Battery) CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. If you want to erase CMOS... 1. Turn OFF the computer and unplug the power cord. 2. Remove the battery, wait for 30 second. 3. Re-install the battery. 4. Plug the power cord and turn ON the computer.
BIOS Setup is an ov erv iew of the BIOS Setup Program. The program that allow s users to modify the basic sy stem configuration. This ty pe of information is stored in battery -backed CM OS RAM so that it retains the Setup information w hen the pow er is turned off. ENTERING SETUP Pow ering ON the computer and pressing immediately w ill allow y ou to enter Setup. If y ou require more adv anced BIOS settings, please go to "Adv anced BIOS" setting menu.
English If you can't find the setting you want, please press "Ctrl+F1" to search the advanced option hidden. • Standard CMOS Features This setup page includes all the items in s tandard c ompatible BIOS. • Advanced BIOS Features This setup page includes all the items of Aw ard special enhanced features. • Integrated Peripherals This setup page includes all onboard peripherals. • Power Management Setup This setup page includes all the items of Green func tion features.
CMOS Setup Ut ility-Co pyright (C) 1984 -2004 Aw ard Soft ware Stan dard CM OS Feat ures } } } } } } Date (mm:dd :yy) Time (hh:mm :ss) wed, Sep 1 2004 22:3 1:24 IDE IDE IDE IDE IDE IDE [No ne] [No ne] [No ne] [No ne] [No ne] [No ne] C hannel C hannel C hannel C hannel C hannel C hannel 0 0 1 1 2 3 M aster Slave M aster Slave M aster M aster Driv e A Driv e B Flopp y 3 Mode S uport [1.44M, 3.
English Prec omp Write precomp Landing Zone Landing zone Sec tor Number of sec tors If a hard disk has not been installed, selec t NONE and press . Drive A / Dri ve B The c ategory identifies the ty pes of floppy disk driv e A or driv e B that has been installed in the computer. None No floppy driv e installed 360K, 5.25" 5.25 inch PC-ty pe standard driv e; 360K by te capacity . 1.2M, 5.25" 5.25 inch AT-ty pe high-density driv e; 1.2M by te capacity (3.5 inch w hen 3 Mode is Enabled). 720K, 3.5" 3.
CMOS Setup Ut ility-Co pyright (C) 1984 -2004 Aw ard Soft ware Adva nced BI OS Feat ures } Hard Disk Bo ot Prio rity First Boot De vice Secon d Boot D evice Third Boot De vice Pass word C heck higf: M ove Enter: Select F5: P revious V alues [Press Enter] [Flo ppy] [Hard Disk] [CDR OM] [Set up] Item Help Menu L evel} Select Hard Disk Boot Devi ce Prio rity +/-/ PU/PD: V alue F10: Save F6: Fa il-Safe De fault ESC: Exit F1: General Help F7: Optimiz ed Defa ults Hard Disk Boot Priority Selec t boot sequen
English Integrated Peripherals CMOS Setup Ut ility-Co pyright (C) 1984 -2004 Aw ard Soft ware Inte grated Periphe rals OnChi p IDE Cha nnel0 OnChi p IDE Cha nnel1 OnChip Serial ATA SATA Mode AC97 Audio VIA Onboard LAN USB 1 .1 Contr oller USB 2 .
Enable USB 2. 0 controller. (Default v alue) Disable USB 2. 0 controller. English Enabled Disabled USB Keyboard Support Enabled Disabled Enable USB key board support. Disable USB key board support. (Default v alue) USB Mouse Support Enabled Disabled Enable USB mouse support. Disable USB m ouse support. (Default v alue) Onboard Serial P ort 1 Auto 3F8/ IRQ4 2F8/ IRQ3 3E8/ IRQ4 2E8/ IRQ3 Disabled BIOS w ill autom atically s etup the port 1 address. Enable onboard Serial port 1 and address is 3F8.
English Power Management Setup CMOS Setup Ut ility-Co pyright (C) 1984 -2004 Aw ard Soft ware Powe r Manag ement S etup ACPI Suspend Type x USB D evice Wa ke-Up fr om S3 Power LED in S1 state Soft- Off by P WRBTN AC B ack Func tion Keybo ard Powe r On Mous e Powe r On PME E vent Wak e Up ModemR ingOn/Wake OnLan Resu me by A larm x Date ( of Month) Alarm x Time ( hh:mm:ss) Alarm higf: M ove Enter: Select F5: P revious V alues [S1(P OS)] Disa bled [Blin king] [Instan t-Off] [Soft -Off] [Disa bled] [Disa bl
When set at Enabled, any PCI-PM ev ent can aw ak e the sy stem from a PCI-PM controlled stated. This feature requires an ATX pow er supply that prov ides at least 1A on the +5VSB lead. Disabled Disable this function. Enabled Enable PME as w ake up ev ent. (Default v alue) ModemRingOn/WakeOnLan An incom ing call v ia modem or an input s ignal comes from the other client serv er on the LAN can aw ake the sy stem from any suspend s tate. Disabled Disable Modem Ring on func tion.
English PC Health Status CMOS Setup Utility-Copyright (C) 1984-2004 Award Software PC Health Status Rese t Case Open St atus [Disa bled] Item Help Case O pened No Vcore OK Menu Level u 25V STR OK [Disabled] +3.
CMOS Setup Ut ility-Co pyright (C) 1984 -2004 Aw ard Soft ware Frequ ency/Vol tage Con trol Auto Detect PCI/DIMM Clk Spre ad Spec turm CPU Host Cl ock Con trol x CPU C lock DRAM Clock( MHz) AGP OverVolt age Con trol DIMM OverVol tage Con trol [Enab led] [Enab led] [Disa bled] 100 MHz [By SPD] [Au to] [Au to] higf: M ove Enter: Select F5: P revious V alues +/-/ PU/PD: V alue F10: Save F6: Fa il-Safe De fault Item Help Menu L evel} ESC: Exit F1: General Help F7: Optimiz ed Defa ults Incorrect using thes
English DIMM O verVoltage Control Increase DIMM v oltage may get stable for ov er-clock. But it may damage to memory m odule w hen enable this feature. Auto Supply v oltage as DIMM required. (Default v alue) +0.1V Increase DIMM v oltage +0.1V. +0.2V Increase DIMM v oltage +0.2V. +0.3V Increase DIMM v oltage +0.3V.
English Set Supervisor/User Password CMOS Setup Ut ility-Co pyright (C) 1984 -2004 Aw ard Soft ware } } } } } } } Stan dard CM OS Feat ures Adva nced BI OS Feat ures Inte grated Periphe rals Powe r Manag ement S etup PnP/ PCI Con figuratEnte ionsr Passw ord: PC H ealth St atus Frequ ency/Vol tage Con trol Load Fail-Sa fe Defa ults Load Optimiz ed Defa ults Set Supervis or Pass word Set U ser Pass word Save & Exit S etup Exit Without S aving higf: Selec t Item F10: Save & Exit S etup ESC: Quit F8: Q- Fla
English Save & Exit Setup CMOS Setup Ut ility-Co pyright (C) 1984 -2004 Aw ard Soft ware } } } } } } } Stan dard CM OS Feat ures Load Fail-Sa fe Defa ults Adva nced BI OS Feat ures Load Optimiz ed Defa ults Inte grated Periphe rals Set Supervis or Pass word Powe r Manag ement S etup Set U ser Pass word PnP/ PCI Con figurat ions Save to CMOS an d EXITSave (Y/ N)? & Exit Y S etup PC H ealth St atus Exit Without S aving Frequ ency/Vol tage Con trol higf: Selec t Item F10: Save & Exit S etup ESC: Quit F8: Q-
English Revision ChapterHistory 3 Install Drivers Install Drivers Pictures below are shown in Windows XP Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the setup.exe. Install Chipset Drivers This page shows the drivers that need to be installed for the system.
English Driver install finished ! You have to reboot system ! Item Description n VIA 4IN1 Driver For INF, AGP, IDE and DMA driver n VIA KM400/KM266PRO VGA Driver For KM400/KM266PRO drvier n USB Patch for WinXP This patch driver can help you to resolve the USB device wake up S3 hang up issue in XP n VIA Lan Driver For VIA Phy family Lan driver n VIA AC97 Audio Driver Audio driver for VIA codec chipset n VIA 8237 Serial ATA Driver For VIA 8237 SATA Driver n VIA USB 2.
English - 37 - Driver Installation
English 7VM400AM-RZ Motherboard - 38 -
English Contact Us — Taiwan (Headquarters) — GIGA-BYTE TECHNOLOGY CO., LTD. NIPPON GIGA-BYTE CORPORATION Japan Address: No.6, Bau Chiang Road, Hsin-Tien, Taipei Hsien, Taiwan WEB address : http://www.gigabyte.co.jp — Singapore TEL: +886 (2) 8912-4888 GIGA-BYTE SINGAPORE PTE. LTD. FAX: +886 (2) 8912-4003 Tech. Support : Tech. Support : http://tw.giga-byte.com/TechSupport/ServiceCenter.htm http://tw.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : Non-Tech.
English — China — Australia NINGBO G.B.T. TECH. TRADING CO., LTD. Tech. Support : GIGABYTE TECHNOLOGY PTY. LTD. Tech. Support : http://cn.giga-byte.com/TechSupport/ServiceCenter.htm http://www.giga-byte.com.au/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.gigabyte.com.cn http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.giga-byte.com.
