User`s manual

EnglishDeutschDeutschEnglishEnglishEnglishEnglish

The Poseidon is provided with another transparent projector panel, which can be DIY designed

and replaced with the projector bracket under front panel.

Required tool: transparent projector panel (slides and laser printer or copy machine should be

provided by the user)

4-10-1 Please visit Gigabyte website (http://

gwebmanager1:7001/Products/Chassis/Default.

aspx) to search the Poseidon series case products

by ﬁ le name “DIYbracket_Poseidon.doc”.

4-10 DIY Front Bracket of Projector Light

Print out the slides by 1:1

(Please use the laser printer or copy machine)

4-10-2 Trim the slide along the edge lines.

4-10-3 Post the trimmed slide onto the transparent projector

panel.

4-10-4 Remove the factory default plate located in the

bottom of the front panel.

(See Figure a and Figure b)

4-10-5 Push forward to remove the factory default plate.