User`s manual

Appendix - 80 -
Create Arrays Manually
To create a new array, press <2> to enter the Dene LD Menu window (Figure 4). The Dene LD selection
from the Main Menu allows users to begin the process of manually dening the drive elements and RAID
levels for one or multiple disk arrays.
In Figure 4, use the up or down arrow key to move to a logical disk set and press <Enter> to enter the RAID
conguration menu (Figure 5).
Figure 4
Figure 5
Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.
[DeneLDMenu]
LD No RAID Mode Total Drv Capacity (GB) Status
LD 1 ---- ---- ----- ----
LD 2 ---- ---- ----- ----
LD 3 ---- ---- ----- ----
LD 4 ---- ---- ----- ----
LD 5 ---- ---- ----- ----
LD 6 ---- ---- ----- ----
LD 7 ---- ---- ----- ----
LD 8 ---- ---- ----- ----
LD 9 ---- ---- ----- ----
LD 10 ---- ---- ----- ----
[
h
] Up [
i
] Down [ESC] Exit [Enter] Select
[ Keys Available ]
[ Keys Available ]
Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.
[DeneLDMenu]
[
h
] Up [
i
] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change
[ Keys Available ]
[ Drives Assignments ]
Channel:ID Drive Model Capabilities Capacity (GB) Assignment
1:Mas WDC WD800JD-22LSA0 SATA 3G 79.89 N
2:Mas WDC WD800JD-22LSA0 SATA 3G 80.02 N
LD No RAID Mode Total Drv
LD 1 RAID 0 0
Stripe Block: 64 KB Fast Init: ON
Gigabyte Boundary: ON Cache Mode: WriteThru