User Manual
Table Of Contents
- Introduction
- Unpacking
- _bookmark2
- Product_Overview
- _bookmark4
- Getting_Started
- Installing_the_Monitor_Base
- _bookmark5
- Adjusting_the_Viewing_Angle
- _bookmark6
- Installing_a_Wall-Mount_Bracket_(Optiona
- _bookmark7
- Using_the_Device
- Turning_the_Power_On/Off
- _bookmark9
- Selecting_the_Input_Source
- _bookmark11
- Operations
- Quick_Menu
- _bookmark12
- _bookmark14
- Configure_the_Device_Settings
- _bookmark15
- _bookmark17
- _bookmark19
- _bookmark20
- _bookmark21
- Appendices
- Specifications
- _bookmark23
- Supported_Timing_List
- _bookmark24
- Troubleshooting
- _bookmark25
- Basic_Care
- Notes_on_USB_Charging
- GIGABYTE_Service_Information
- _bookmark26
- INTRODUCTION
- GETTING STARTED
- USING THE DEVICE
- OPERATIONS
- Quick Menu
- APPENDICES
- SAFETY INFORMATION
LCD Monitor User's Manual
-
41
-
Troubleshooting
Problem Possible Solution(s)
No power • Make sure the power cable is properly connected
to the power source and the monitor.
• Check the cable and plug to make sure they are not
broken.
• Make sure the monitor is turned on.
No image appears
on the screen
• Make sure the monitor and the computer are properly
connected and both devices are turned on.
• Make sure you have selected the correct input
source. Refer to page 20 or 32.
The image
does not ll the
entire screen
•
Try dierent Display Mode (aspect ratio) setting.
Refer to page 29.
The colors are
distorted
• Make sure the input signal cable is properly connected.
• Congure the image related settings. Refer to the “Picture”
section.
No sound or
volume is low
• Make sure the headphone cable is properly connected.
• Adjust the volume level. Refer to page 22 or 34.
• Check the Audio Source setting.
• Adjust your computer sound related settings.
Note: If the problem persists, please contact our customer service for further assistance.