User Manual
Table Of Contents
- Introduction
- Unpacking
- _bookmark2
- Product_Overview
- _bookmark4
- Getting_Started
- Installing_the_Monitor_Base
- _bookmark5
- Adjusting_the_Viewing_Angle
- _bookmark6
- Installing_a_Wall-Mount_Bracket_(Optiona
- _bookmark7
- Using_the_Device
- Turning_the_Power_On/Off
- _bookmark9
- Selecting_the_Input_Source
- _bookmark11
- Operations
- Quick_Menu
- _bookmark12
- _bookmark14
- Configure_the_Device_Settings
- _bookmark15
- _bookmark17
- _bookmark19
- _bookmark20
- _bookmark21
- Appendices
- Specifications
- _bookmark23
- Supported_Timing_List
- _bookmark24
- Troubleshooting
- _bookmark25
- Basic_Care
- Notes_on_USB_Charging
- GIGABYTE_Service_Information
- _bookmark26
- INTRODUCTION
- GETTING STARTED
- USING THE DEVICE
- OPERATIONS
- Quick Menu
- APPENDICES
- SAFETY INFORMATION
LCD Monitor User's Manual
-
4
-
Stability Hazard Precautions
The product may fall, causing serious personal injury or death. To prevent injury, this
product must be securely attached to the oor/wall in accordance with the installa-
tion instructions.
Many injuries, particularly to children, can be avoided by taking simple precautions
such as:
•
ALWAYS use stands or installation methods recommended by the
manufacturer of the product set.
•
ALWAYS use furniture that can safely support the product.
•
ALWAYS ensure the product is not overhanging the edge of the supporting
furniture.
•
ALWAYS educate children about the dangers of climbing on furniture to reach
the product or its controls.
•
ALWAYS route cords and cables connected to your product so they cannot be
tripped over, pulled or grabbed.
•
NEVER place a product in an unstable location.
•
NEVER place the product on tall furniture (for example, cupboards or
bookcases) without
•
anchoring both the furniture and the product to a suitable support.
•
NEVER place the product on cloth or other materials that may be located
between the product and supporting furniture.
•
NEVER place items that might tempt children to climb, such as toys and
remote controls, on the top of the product or furniture on which the product
is placed.
•
If the existing product is going to be retained and relocated, the same
considerations as above should be applied.
•
To prevent personal injury or damage to the product caused by tipping over
due to earthquakes or other shocks, make sure to install the product in a
stable location and take measures to prevent falling.