Installation Manual

Front seat cover:
1. Align the bucket cover over the seat and slide it down gently,
ensure that the designs are lined up correctly. If you are not
button).
center of the cover and push it through the back seat crevice
and tighten the straps on the bottom of the seat.
Optional: If your front seat center crevice is
locating the strap on the bottom rear of the
seat.
3. Fit the base part of the cover over seat and secure it by
connecting the elastic loops underneath the seat with supplied
Snaps OR you can just tuck the mesh cloth underneath the
seat.
4. Reinsert headrest and cover it with headrest cover, secure
headrest cover by fastening the elastic straps inside the
headrest cover and close the opening with the velcro on top of
the seat cover.
Video Instructions are available at www.fhseatcovers.com/installation