Safety Information This chapter contains important information on safe and efficient operation. Please read this information before using the device. Exposure To Radio Frequency (RF) Energy The device contains a transmitter and a receiver. When it is ON, it receives and transmits RF energy. Please use the device appropriately. Specific Absorption Rate Data The highest SAR value for this device when tested for use at the ear is 0.581 W/kg.
General Information This chapter contains important information on safe and efficient operation. Please read this information before using the device. Ignorance of the following notices may lead to violations of the law. Before using the device, please make sure you have fully charged the battery. Do NOT remove the battery from the device during charging. Before inserting SIM card into the device, make sure that the device is switched off. Do NOT attempt to dissemble the device on your own.
2.1 2.2 2.3 2.4 2.5 4 Today Screen................................................................................................................................17 Start Menu List..............................................................................................................................18 Applications...................................................................................................................................18 Settings...............................................
This chapter introduces you to the hardware of the device and its function keys. 1.Power On / Off: Press and hold the power button for a few seconds to turn on / off your device. 2.Stereo speaker: You may play music / voice through speaker. 3.LED Indicator: The LED Indicator indicates the status of your device by showing different colors. Blue: Bluetooth is activated Orange: Wi-Fi is activated White: indication and alert Green: mobile network detected 4.
.Flag Key: Press the flag key to open “ Start ” menu options. 9.Right Function Key: Perform the function of menu or program command displayed on the down-right corner screen. 10.End Key: Press this key to end a call or to switch between Today & 3D Quick Menu. 11.OK Key: Press this key to execute or terminate a selected function or application. 12.Navigation Key: Use up, down, left and right directions to navigate. Press the center key to execute the selected function or application. 13.
18.Camera Key: Press camera key to launch camera function. 19.Volume Key Slide this key upwards or downwards to adjust volume. Press this key to launch Voice Commander. 20.Stereo Speaker: 21.Flash: Support Auto Flash / Forced Flash On / Forced Flash Off mode. 22.Stylus : Use the stylus to touch the screen panel. 23.Battery Lock: Pull down the battery lock to remove a battery or to install a SIM card. 24.Battery 25.Camera Lens: Capture a photo or film a video through this lens. 26.Macro Mode Switch 27.
Key 5-Way Navigation Key - Up 5-Way Navigation Key - Down 5-Way Navigation Key - Left 5-Way Navigation Key - Right 5-Way Navigation Key - Center Call key End Key Power On / Off Press and hold: power off Flag Key OK Key Left Function Key Right Function Key Camera Key Volume Key Reset Key Function Move cursor up Move cursor down Move cursor to the left Move cursor to the right Execution Press: enter phone function. Press: return to Today screen.
3.It takes 3 hours to fully charge your battery for the first time. After the first time, the charging process will be completed by around 2.5 hours. 4.When the LED indicator flashes in blue, it means the battery is charging. 5.When the LED indicator goes out, it means the charging is complete. 6.The battery icon on task bar on Today screen shows the battery status. You may also check the battery status in “ Start ” > 【Settings】 > System Tab > Battery Tab.
You can also choose your screen display in Portrait or Landscape. 1.Press and hold OK any time when the device is on to switch your screen display between Portrait and Landscape. You can also change the default screen display by following the steps below: 1.Tap“Start”> 【Settings】 > System Tab > 【Screen】 > General Tab. 2.On General Tab screen, select your desired orientation. Portrait, Landscape RightHanded, Landscape Left - Handed. 3.Tap “ OK ”, the screen will change accordingly.
off, and the device enters Standby mode. 2.Touch the screen under standby mode, the screen will light up again. You may start performing normal operations. Sleep Mode 1.Sleep Mode is a power saving mode designed to reserve battery power. You may enter Sleep mode by pressing power On / Off key shortly. The backlight of the screen will turn off and the device will go into Sleep mode. When in Sleep mode, your device will show no response to any operation or touches on the screen and keypad. 2.
tab, and check both “ Identification Information ”and “ Note ”. 6.Select “ OK ” to finish setup and save it. You can set your own password to prevent unauthorized use of your device. 1.Tap “ Start ” > 【Settings】 > Personal Tab > 【Lock】 > Password Tab. 2.On Password tab screen, check “ Prompt if device unused for ”. 3.Select an appropriate time. 4.Select a password type in “ Password Type ” field. 5.Input your password in the “ Password ” field and reconfirm the password in “ Confirm”. 6.
Reboot System: When you reboot the device, all running programs will stop and you will lose all unsaved information. Please make sure that all information has been saved before performing system reboot. 1.Reset key is located on the bottom right side of your device. 2.Use the stylus to softly poke the reset key on the lower right side of the device to reboot your system. System Reset: When executing system reset, you are performing a clean boot on the device.
4.Place the device in the case when you are not using it. Please follow the suggestions below when you are traveling with the device: 1. Back up your data. 2.Copy your data in a mini SD card. 4.Remove all other connected device. 5.Bring your charger. 6.Place your the device in the case. 7.If you are in an air plane, please make sure that you have turned your device into the flight mode. 8.Make sure you have brought a specific adapter for the country you are traveling.
1.Start Menu : Tap to open the start menu list. 2.Battery Status : Shows the current battery status. 3.Connection Status : Shows the connection status of the device. 4.SIM Card Status : Shows SIM card status. 5.Volume : Tap to adjust the speaker or phone volume. 6.Time : Shows time and the latest appointment. 7.Today Screen : Shows all important information of today. 8.Call History : Tap to enter Call History. 9.Contacts : Tap to view your Contacts. Icon Description All sound alerts are on.
Mobile phone is off (Flight mode). Mobile phone is on. GPRS is available. GPRS is disconnected. GPRS is connected. Bluetooth is activated. 1.The applications in this block are fixed for some Microsoft applications. 2.The applications in this block are the last 5 programs that you have used. 3.Tap on Programs, to enter the programs screen. 4.Tap on Settings, to enter the settings screen. 5.Tap on Help, to see detail information about your device. You will see many application icons on your Programs screen.
【Phone Manager】 【Block List】,【Modem Link】,【SIM Contacts】, 【Download Agent】 【Games】 【Bubble Breaker】,【Solitaire】 【ActiveSync】 Transmit data between your computer and the device. 【Pocket MSN】 Perform MSN functions. 【Excel Mobile】 Execute Excel files. 【PowerPoint Mobile】 Execute PowerPoint files. 【Word Mobile】 Execute Word files. 【Calculator】 Perform basic calculations. 【Notes】 Write notes, memo, or drawings. 【Search】 Search for all data, programs, and files.
Sounds & Notifications Settings for alarm sound and notification. Today Settings for screen appearance and display items. Select “ Start ” > 【Settings】 > System Tab Program About Backlight Description Contains information of the device. Settings for backlight. Identifies the device to others to prevent unauthorized Certificates access. Clock & Alarms Settings for time and alarms. GPS Settings for using GPS function. Memory Memory status and running programs. Power Power status and wireless signals.
Screen Keyboard You can input data by using screen keyboard. Tap on the keyboard icon on your screen to open the screen keyboard. Follow the following steps below to input your data: 1.On your screen keyboard, tap 【Shift】 or 【CAP】 key to input a Capitalized letter or some common symbols. 2.Tap the key on your screen keyboard to delete. 3.To close the screen keyboard, tap the keyboard icon again on your screen to hide the screen keyboard. Letter Recognizer 1.
Press key, or select “ Start ” > 【Phone】 to enter phone function. Please insert a SIM card before using phone. 1.Before inserting / removing a SIM card, please make sure that the device is turned off and is not connected to any power supply by the USB cable or charger. 2.Remove the battery from the battery slot. 3.Insert / Remove the SIM card from the SIM card slot. 4.Replace the battery back to the battery slot. 1.
Smart Dial Use this function to search a contact or a specific number quickly. 1.On the phone screen, slide down the keypad to enter smart dial. 2.The smart dial screen will display all contacts in this device and history calls. 3.After inputting the first number/letter, the smart dial screen will display only the matching phone number and contacts on the screen. For example: after inputting 0, the smart dial screen will only display phone numbers which begins with 0. 4.
on . 1.Press the volume adjustment key on the side manually or tap > to adjust incoming call volume. 2.If you press the volume adjustment key on the side of this device or tap > icons during a call, you may adjust the in - call volume of the phone. You can only adjust it when during a call. 3.When you select Vibrate, the 4.When you select Off, the icon will change to icon. icon on screen will change to icon.
In Contacts, Tap { New } on the bottom left of screen. A blank record will appear. 1.You may set photos in photo field for this contact, by which the contact’s photo will display as an incoming call photo ID. 2.You may also tap ringtone field to set different incoming call ringtones for your contacts. 3.Tap“OK”on the upper right screen to save the new contact and exit. Call History contains all outbound calls, incoming calls and missed calls. You may choose to display all or only display highlighted items.
3.You can set keypad tone for dialing. 4.You can set personal password to prevent unauthorized use from others. Use this function to copy the contacts in SIM card to this device. 1.Select “ Start ” > 【Programs】 > 【Phone Manager】 > 【SIM Card Contacts】. 2.All contacts in SIM card will show on the screen. 3.Select { Copy Now }, and your new contacts in SIM card will be copied to “ Contacts ” in this device. 4.Select “ X ” to exit without copying SIM card data to the device.
Select “ Start ” >【Programs】>【Phone Manager】>【Block List】 1.Check “ Block all unknown calls ” or tap { Menu } and select { Add Block List } to add a number you would like to block. 2.Select “ OK ” to save the settings. Alternatively, tap { Contacts} on Today screen, highlight the contact you would like to block and tap { Menu }. Select “ Set to Block List ”. You may also block numbers in Call History, or create new blocked numbers in Block List.
You may set your personalized settings by preference 1.Select “ Start ” >【Settings】> Personal Tab >【Shutdown Animation】 2.Select your preferred Animation File, Sound File, Show Time. Tap User Define in “ Animation File ” to set your own file as shutdown animation. 3.Select “ Preview ” to view your settings. 4.Tap “ OK ” to save and exit. Handset Applications contains additional handset related settings. 1.Tap “ Start ” >【Settings】> Personal Tab >【Handset Applications】 2.
4.Select“Activate Time”to set how many seconds that your answer machine will wait before answering an incoming call. 5.Select { Greeting Setup } to set greeting screen. 6.Tap “ OK ” to save setup and return to System tab screen. You will find callers’ messages in “ My Answer Machine ” folder. Greeting Setup: Tap { Greeting Setup } to set default answer machine greeting or record your own greeting. Press the play button to listen to the current greeting. 1.Select a style to be your greeting message. 2.
5.Press “ OK ” to validate the settings and exit. You may also use the files you have recorded as background effects. To do so, save the files under My Background Sounds in My Documents, then repeat step 1 to 5. After activating background effects, when an incoming call rings, tap { Answer } to answer with the background sound you have selected, or tap on the icon and choose “ Off ” from the drop down menu to answer without the background sound.
˙“ Password ” : restrict access to your data. ˙“ Power ” : extend battery lifetime. ˙“ Today ” : personalize “T oday Screen ” appearance and information. When you change your Today theme in Today > Theme tab, your Today background, phone skin, and theme color, will all change accordingly. If you have already scheduled appointments in Calendar, job deadlines in Task bar, or alarm setup in Clock & Alarms, then this device will alert you according to your settings.
2. Battery Power tab: set the turn on method and turn off time for backlight when using battery power. 3. External Power tab: set the turn on method and turn off time for backlight when using external power. 4. Extended tab: adjust the brightness of backlight. “ Search ” function may help you to rapidly find the information you desire. 1. Select “ Start ” >【Programs】>【Search】 2. Input the text you want to search in search field. 3. You may also select proper file type in type field to search the file you want.
You may set certain keys as the activation keys for your most common used programs. 1. Select “ Start ” >【Settings】> Personal tab >【Buttons】> Program Buttons tab. 2. Under Program Buttons tab screen, select desired function key. 3. In specified program field, select the program you want to set. 4. Tap “ OK ” to save and return to Personal tab screen.
Services: 1.Select “ Start ” >【Settings】> Personal tab >【Phone】> Services tab. 2.Check the items you want to select. 3.Tap “ OK ” to save settings and return to Personal tab screen. Note: All services in Services are provided by operators. Please contact your operator for enquiries regarding these services. Network: Select “ Start ” >【Settings】> Personal tab >【Phone】> Network ˙Under Current network,tap “ Find Network ” to automatically search for the network in use.
Contacts tab: 1.Select “ Start ” >【Settings】> System tab >【Voice Commander Settings】> Contacts tab. 2.Select a contact from contacts list. 3.Press key to play system pronunciation method. 4.Press voice tag to record your own pronunciation method. 5.Press delete key to delete voice tag. Application tab: 1.Select “ Start ” >【Settings】> System tab >【Voice Commander Settings】> Application tab. 2.Select an application from applications list. 3.Press key to play system pronunciation method. 4.
Advanced Settings tab: 1.Select “ Start ” >【Settings】> System tab >【Voice Commander Settings】> Advanced Settings tab. 2.Select the desired sensitivity. 3.Select the length of phone number. Press ” OK ” to save Settings and return to System tab screen. You may use Microsoft ActiveSync to synchronize data in this device with personal computer. ˙You can synchronously update Outlook data in this device and in your personal computer.
Note: Before installing ActiveSync, do not connect your device to the computer. You may only connect the device to the computer by using the USB cable AFTER ActiveSync is installed. 1.ActiveSync Installation: use the enclosed CD to install Microsoft ActiveSync in your personal computer. This device already has built-in ActiveSync. 2.Hardware Installation: connect this device with your personal computer by using the USB cable. 3.
When using GPRS and Internet connection, you will not be able to answer a call. If you want to make a call, your device will automatically disconnect to the Internet and reconnect to the Internet at the end of conversation. Before using GPRS to connect to the Internet, please confirm with your system provider whether this service is enabled and supported on your SIM card. If you already have a SIM card, then you only need to apply to your system provider for GPRS function.
Connections. After completing connection, you may go Internet surfing or send and receive email. GPRS Wizard helps you to manually select your GPRS network with more ease. 1.Tap “ Start ” >【Settings】> Connections tab >【GPRS Wizard】 2.Choose the regional name of your location. 3.Choose the desirable network, or tap “ Add ” to add new networks. 4.Tap “ OK ” to save the changes and exit. If you want to connect this device with your personal computer, please see “Chapter 5 ActiveSync Synchronization Tool”.
Wi-Fi allows this device to connect with detected network through WI-FI. 1. Select “ Start ” >【Settings】> Connections tab > Wireless Manager. 2. Tap {Wi-Fi}. 3. Tap“OK”to activate wireless network and exit. After activating WI-FI, a new window, “ New Network Detected ”, will appear. Select Connect and enter your password to the local network.Press Connect to connect this device with local network.You may use WI-FI for up to 2 hours. The actual use time will depend on the power status of your battery.
Before receiving and sending your email or message, please make sure that this device has connected to a network. When you are connected to a network, you may go to【Messaging】to receive and send your email or message. You may: 1.Use this device to directly connect with email server and receive or send letter. 2.Synchronously update the Microsoft Outlook or Microsoft Exchange Server email in this device and personal computer. The synchronization function of inbox does not support Microsoft Outlook Express.
If you select not to perform synchronization, you may manually copy or move email messages between this device and the computer. 2.Only the mail in “ Inbox ” of your computer will be synchronized. 3.Only the mail in Exchange or Outlook can be synchronized. 4.The mail from “ Outbox ” folder in this device will be sent to your computer first, and then it will be delivered through Microsoft Exchange Server or Microsoft Outlook. 5.
˙SMTP server name for outgoing mail 2.Establish Email Services: Select Messaging > { Menu } > Tool > New Account, and then follow the instructions on the screen to set up a new email account. 3.See “ 6.1 Internet Access ” to connect this device to a network and start receiving and sending email and messages. 4.Connect with Email Server: Select【Messaging】> { Menu } > Send and Receive. Select【Messaging】> { Menu } > Tool > Options > Account tab to change email account settings.
6.Select { Menu } to open menu. Under new mail screen, select and hold to activate related Menu. Read and reply mail: Select【Messaging】> { Menu }, and then select Send and Receive from { Menu } to start sending and receiving new mail. Select “ Inbox ” on the bottom left of screen to view Inbox. Tap on any unread mail to view its content. When reading mail, you can: 1.Tap on a contact in “ To, CC, BCC ” fields to save this contact as a new contact. 2.Tap { Reply } to compose a reply email. 3.
5. Set the Peak times to “As items arrive” and the Off-peak times sync time to “As items arrive”. Tap “OK”. Now you have established a cooperative relationship for the device and the Exchange Server. The next time when you select “Start” > ActiveSync > Sync, you may synchronize with Exchange Server using Wi-Fi or GPRS. Once you are connected to the network, you may look up your Global Address List over the air from your device by tapping “Contacts”.
8.Select { Menu } to open menu. In { Menu }, you may insert voice and video clip, add page, and change background color of MMS. Read and Reply Messages: Select Messaging > { Menu } > Inbox to view all received MMS messages.Select { Menu } > { Send / Receive } to receive new MMS.Select any unread mail in Inbox to view content. When reading MMS, you can: 1.Select {Reply} to reply to this MMS. 2.Select {Menu} to open menu. 3.
MSN Messenger 1.Select “ Start ” >【Programs】>【Pocket MSN】>【MSN Messenger】 2.Tap { Tap here to sign in }. 3.Enter your MSN or Hotmail email address and password. 4.Select { Sign In }. MSN Hotmail 1. Select “ Start ” >【Programs】>【Pocket MSN】>【MSN Hotmail】 2. Input your MSN or Hotmail email address and password. 3. Select { Sign In } to enter MSN Hotmail Inbox screen. 4. In MSN Hotmail Inbox, you may receive your MSN or Hotmail email through network. Compose Hotmail: 1.
When you want to form connection through Bluetooth, please make sure the device you would like to make connections with is also equipped with Bluetooth. When Bluetooth is activated, tap icon on Today screen, and you will see icon in the pop-up window. Bluetooth is a short distance wireless communication technology. Devices with Bluetooth can exchange information over a distance of about 10 meters (3 feet). Before using Bluetooth function, please finish connection setup first. 1.
1.Select { New Incoming Port } to enter setup screen. 2.Select a port to be set. 3.Select { Finish }.
Watch full screen analog TV on this device and be the first to get the news! Depending on the power status of the battery, you may watch TV for up to 2 hours. Please plug in the device headset before watching TV in this device. The headset is also an antenna. You ca adjust the headset lines for better signals. When launching TV for the first time, this device will automatically start searching for available channels and will set the first channel detected as default channel.
8.Tap for TV Help. When watching TV, you may use keypad to enter the number of the channel you would like to watch. TV Volume Control Method: You may use volume control key on the side to adjust volume. When watching TV, the volume adjustment bar will appear on the bottom of the screen after you press volume control key. You may tap volume adjustment bar by preference and select suitable volume. TV Settings: You may choose to set a searching range for channel search function.
7.Tap to start recording the FM radio broadcast of the channel you are currently listening to. The recording time will be displayed on the top of screen. Tap “STOP” to stop recording. 8.Number key on screen: You can enter a channel frequency and the frequency you entered will appear on the display. If the channel frequency you entered is over or less than the effective range, then the radio will return to the original channel you were listening to.
Camera Menu Video Mode: Tap on this icon to switch to video mode. Pictures & Videos: view your photos here. Camera Settings: to open the menu for camera settings. Settings: 1.Shooting Mode: you may select different shooting modes to fit the shooting environment. 2.Effect: you may apply many different photo effects. 3.Size : 1600 x 1200 (default), 1280 x 960, 800 x 600, 640 x 480, 320 x 240, 160 x 120. 4.Picture Quality : Normal (default), fine, low. 5.Timer : Off (default), 5 seconds, 10 seconds. 6.
Video Menu: Camera Mode: Tap on this icon to switch to camera mode. Pictures & Videos: view your photos here. Video Settings: to open the menu for video recorder settings. Settings: 1.Shooting Mode: you may select different shooting modes to fit the shooting environment. 2.Effect: you may apply many different photo effects. 3.Video Format: you can select the format you would like to record in. 4.MMS Video: you can select to make a recording especially for MMS. 5.Storage Location: Phone (default), SD.
Note: 1.If there is incoming call during recording, answering the call will automatically terminate recording. If you want to continue recording after ending call,you need to reactivate recording function. 2.When TV or FM radio is activated on this device, recorder will record the only the sound of the broadcasting programs. You may use【Pictures & Videos】function to manage your photos or videos. In【Pictures & Videos】> {Options}, you may resize the picture.
˙Play Music / Pause / Resume to play / pause / resume music in My Music. ˙Next / Previous to play the next/previous music file in My Music. ˙Play + (Music File) to play the music file you have chosen. ˙Start + (Application) to launch an application. ˙(today’s / tomorrow’s / this week’s) + appointments, Voice Command will report all appointments within the time period you have chosen. ˙Read SMS, Voice Command will report whether there are unread SMS. ˙What can I say? to enter voice command help.
Appointments and Meetings: You may use【Calendar】to arrange appointments, meetings, and other events. You may view your appointments in different display modes. You may select preferred display mode by tapping on the bottom left of screen to switch between day, week, month, year. 1.Select a date to go to the desired date. 2.Select an appointment on the list to view or edit appointment details. 3.Tap on “ Day ” (or Week,Month,Year)on the bottom left corner of the screen to switch between display modes. 4.
Send Meeting Notice: You may use【Calendar】to set meeting notice by combining with the information on Outlook or Pocket Outlook. When you synchronize messages or connect this device with E-mail server, meeting reminders will be generated automatically. Select【Calendar】> { Menu } > Options >Appointments tab, and select desired meeting sending method in “Send meeting requests via” field. Generate Meeting Notice: 1.Select【Calendar】> { Menu } > New Appointment 2.Select “Attendees” field.You will enter【Contacts】.
6.Tap “ OK ” to save and return to contacts. To save a contact from phone to SIM, tap on that contact in the contacts list and then select “Save to SIM” in { Menu }. Searching Contacts: There are four contact search methods provided in this system. ˙Input the contact’s name or phone number in input field, and then the contacts list will key on show the information of this contact.If you want to clear text entered, press screen keypad to clear.
Add a New Task: 1.On “ Tasks ” screen, select New 2.Select a field to input data. 3.Select “ Starts ” and “ Ends ” field to set first and last day of task. 4.You may select Occurs to select whether this task has periodicity. 5.You may select “ Reminder ” to set a time to remind you or select “ None ” (unnecessary to alert). 6.To appoint a task as certain category,tap on “ Category ” field to select a category from the options list. 7.To add notes, select Note tab and input desired content here. 8.
˙Tap on {Menu} to for options. ˙Tap on “ OK ” to save memo and return to memo screen. You may use Word Mobile in this device with Microsoft Word in your computer to easily copy and move document between this device and your computer.Through computer synchronization, you may keep updated contents in both this device and your computer. You may use your Word Mobile to generate documents like letters,meeting minutes and reports.
You may use Excel Mobile in this device with Microsoft Excel in your computer to easily copy or move files between this device and your computer. Through computer synchronization, you can keep updated content in both this device and your computer. You may use Excel Mobile to create documents like Statement of Income and Expenditure. If you want to create a new Excel file, tap “ Start ” >【Programs】>【Excel Mobile】> New, and the screen will open a new Excel file.
You may use PowerPoint Mobile in this device with Microsoft PowerPoint in your computer to easily copy or move document between this device and your computer. Through computer synchronization, you may keep the files in both this device and your computer updated. You may use PowerPoint Mobile to browse or play PowerPoint file. If you want to open PowerPoint file, select “ Start ” >【Programs】>【PowerPoint Mobile】, the screen will show your PowerPoint files list, from which select the file you want to open. 1.
1.Select library folder 2.{ Menu } : select < Open File > to open files not in the library. Select { Update Library } to update library list. 3.Select and hold the file or folder for playing, and then select { Play } or { Queue Up }. You may use synchronization to copy sound and image files from your computer to this device. The Windows Media Player in this device can play Windows Media and MP3 files. You may use the following methods to browse web pages or WAP pages.
2.On Favorites screen, select the website you want to view. ˙Select the website you would like to go to. ˙You may add or delete folders or URL links. Mobile Favorites Folder: After installing ActiveSync to your computer, “ Mobile Favorites ” folder will be added to “ My Favorite ” in your computer. Only items saved in “ Mobile Favorites “ can be synchronized with this device. Follow the steps below to add your favorite website to “ Mobile Favorites ” : 1.
You can save storage space and increase efficiency of the device by compressing some of your files with this ZIP tool. Zipping Files: 1.To zip a file, select “ Start ” >【File Manager】. 2.Tap and hold on a file you would like to zip. A pop-up menu will appear. 3.Select Zip File in the pop-up menu. In the newly appeared window, you may: ˙Select a file name for the zip file. ˙Select a zip method according to your need. ˙Set a password, which will be asked for when you unzip the file. 4.
1.Select “ Start ” >【Programs】>【Game】 2.Select【Bubble Breaker】or【Solitary】to launch a game.
Select “ Start ” >【Settings】> System tab >【Memory】 Main tab: Display current memory status of this device. Storage Card tab: Display the memory status of storage card in this device. Running Program tab: Display all current running programs in this device. Select any program from “ Running Programs List ”, you may select to “ Activate ” or “ Stop”.
All programs pre-installed in the device will be saved in ROM (Read Only Memory) and are not removable. Data saved in ROM will not be lost by accident. All programs that you installed will be saved in RAM (Random Access Memory).As long as there is sufficient space in this device, you may install suitable programs by preference. Add Programs through ActiveSync: 1.Before installing the program, please make sure that the device processor is suitable for the software.
2.Directly download programs to this device by using Internet Explorer in this device. (Please select programs designed for Pocket PC and this device) 3.Read installation instructions, ‘Readme’ file, or accompanied programs provided to you. 4.Run installation executive file in your computer. Add Programs to ”Start” menu: Select “ Start ” >【Settings】> Personal tab >【Menus】. 1.Check the programs to be displayed on “ Start ” menu. 2.Point “ OK ” to save settings and return to Personal tab screen.
Item Specifications System Information Operating System Windows Mobile 5.0 Processor Intel PXA272 416 MHz Memory 64 MB ROM, 64MB RAM Size Dimensions (mm) 109×53.5×24mm Weight (in grams) 153g Batteries Battery Capacity 840mAh Li-Ion Battery Standby time 110 hours Talk time 3 hours Power Duration for Video Playback 12 hours Power Duration for Music Playback 8 hours Charging time Charger 2.5 hours Display Characteristics 2.
Format Max Size Size PAL or NTSC or SECAM Type Polyphone Type Pixels Resolution Macro Mode Video Recording SMS MMS - Audio Format - Video Format - Image Format E-Mail MSN Type Max Size Temperature 72 Video 3GPP, MPEG4, WMV Depends on available RAM Phonebook Depends on available RAM TV PAL or NTSC or SECAM (Depends on country of purchase) Ringtone MP3, WMA, AMR 192 polyphonic mid file DSC JPEG 2.
Why can’t I turn on the device? Ans： Please make sure that the device has sufficient power, and that the battery is secured in the device. Plug the device to an outlet using the travel charger. Check whether the LED light on the device has lighted up, and then press the power key on the device to turn on the device. Why does the screen freezes and does not respond to my commands or input? Ans： Reboot the system to free up memory. The system shall operate more efficiently.
When I open a file or a program, a “Insufficient Memory” message pops up. Ans： The device memory is shared by both storage and programs. You can follow the steps below to free up some memory. Remove some of the rarely used programs you installed. Remove rarely used files. (See 11.2 Memory for more details.) Why doesn’t the screen respond accurately to my stylus taps? Ans： Select “Start”>Settings>System tab>Screen>General tab. Select “Align Screen” to align the screen.
If the connection still fails, remove ActiveSync on your computer and reinstall. How do I take out the mini SD card from the SD adapter? Ans： The card slot on this device is designed for mini SD cards. To remove the mini SD card from the SD card adapter, please hold the SD card adapter with one hand, slightly lift the end of the mini SD card and pull. Example: Why does my notebook crash when I use USB fast charging? Ans： USB fast charging is not suitable for some notebooks.
