Operation Manual

Maya M1 v2│
4-1
4. Using the Internet
4.1 Connecting to the Internet
Your phone connects to the Internet via:
Wi-Fi
GPRS / EDGE / 3G / 3.5G
NOTE:
If you connect to the Internet, you may be charged. If you want to stop the connection, you need to
tap Application Drawer > APPS tab > > SIM management > Data connection to unmark data
enabled.
Wi-Fi
1. Tap Application Drawer > APPS tab > > Wi-Fi.
2. Switch to turn “Wi-Fi” on or off.
To connect to a Wi-Fi network
1. Tap “Wi-Fi”, check Wi-Fi function and turn it on. Begin to search the available Wi-Fi networks.
2. Detected networks are displayed below. Tap one network then tap “Connect”.
3. If you select an open network, the connection is established automatically.
4. To connect a secured connection, you will be prompted for the password. Enter the password and then
tap “Connect”.
5. When Wi-Fi is connected, the connection icon will be displayed on the status bar.
To add Wi-Fi network
1. Tap Application Drawer > APPS tab > > Wi-Fi.
2. On Wi-Fi screen, tap . And an on-screen window will pop-up.
3. Follow the on-screen instructions and enter the necessary information, then tap “Save” to finish the
settings.
To configure Wi-Fi settings
1. Tap Application Drawer > APPS tab > > Wi-Fi.
2. Tap Menu > Advanced to check the Wi-Fi settings.