GN-BTP01 Wireless Bluetooth USB Printer Adapter User Guide Rev.1.
GN-BTP01 Bluet ooth USB P rinter Adapter This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
GN-BTP01 Bluet ooth USB P rinter Adapter Contents Chapter1 Introduction................................................... 4 1.1 Package Contents ...............................................................................................................4 1.2 System Requirements ........................................................................................................4 1.3 LED Status ...........................................................................................................
GN-BTP01 Bluet ooth USB P rinter Adapter Chapter1 Introduction The GN-BTP01 Bluetooth USB Printer Adapter is a quick and effective solution that will turn your printer quickly into wireless printable machine. The user can print contracts, reports or presentations using your device with Bluetooth wireless technology such as adesktop, laptop, PDA or cell phone to the GN-BTP01 installed printer. No wires. No access points. You can whatever you need, whenever you need it. 1.
GN-BTP01 Bluet ooth USB P rinter Adapter 1.4 Feature n n n n n n n n n Remote wake up Printer Highly compatible with versatile printers. Support client side Widcom Bluetooth stack software High performance radio transceiver Supporting HCRP & SPP profile Low power standby mode to enable very efficient Power Management Weight: 30g+-5g Dimensions: 80mm x 43mm x 16mm One-year manufacturer warranty 1.
GN-BTP01 Bluet ooth USB P rinter Adapter Chapter2 Getting Started Notice: If you have already installed USB or LTP port printer, please remove cable and restart your PC. And then refer to the instruction of Section 2.3. If you don’t have installed the printer drver, please follow the Section2.1 and Section2.2. 2.1 Install the Bluetooth USB Printer Adapter Step1. Step2. Step3. Step4. Power on the Printer. Insert the Blutooth USB Printer Adapter into the USB port of the printer.
GN-BTP01 Bluet ooth USB P rinter Adapter Step6. Select the manufacturer and model name for your printer and then click OK to install printer driver. ( Or click Have Disk to Browse the location of printer driver and then click OK to install printer driver. ) Step7. Select the correct printer name and then click OK to install printer driver. Or click Have Disk to install the printer driver from Disk or CD-ROM.
GN-BTP01 Bluet ooth USB P rinter Adapter Step8. The configuration screen of the printer will appear when the printer driver is installed completely. Select the Bluetooth Port of the printer which you have been installed on the Ports page.(For example, ‘port’: Gigabyte, ‘Description’: Bluetooth Port, ‘Printer’: hp deskjet 920c series ) And then go to the General page. Step9. Click the “Print Test Page” button on the General page. If the test page can print out successully, the setting is completed.
GN-BTP01 Bluet ooth USB P rinter Adapter If you have more than two printers with Bluetooth USB printer adapter or you want to change a new printer, you need to add port for the new printer or other printers. Please follow the Step10 ~ Step13. Step10. Click the “Add Port” button. Step11. Select “Bluetooth Printer Port” type and then click “New Port” button.
GN-BTP01 Bluet ooth USB P rinter Adapter Step12. Please select “Gigabyte” from the list and then click “Connect” button. Step13. The configuration screen of the printer will appear. Now, you can find the new port “Gigabyte(1)” will appear on the port checked list. Please select the new bluetooth port of the printer which you have been installed, and then click “Apply” button. Now, please go to the General Page and click “Print Test Page” button to check if the setup is succussfully.
GN-BTP01 Bluet ooth USB P rinter Adapter 2.3 An installed USB or LTP port printer setting Step1. Step2. Step3. Step4. Step5. Step6. Step7. Step8. Step9. Step10. Please remove the printer cable and restart your PC. Power on the Printer Insert the Bluetooth USB Printer Adapter into the USB port of the printer. Plug the power firmly into the receptacle on the Bluetooth USB Printer Adapter. And then plug the power adapter into an electric service outlet.
GN-BTP01 Bluet ooth USB P rinter Adapter Step11. Select the “Ports” page and click the “Add Port” button. Step12. Select “Bluetooth Printer Port” type and then click “New Port” button.
GN-BTP01 Bluet ooth USB P rinter Adapter Step13. Please select “Gigabyte” from the list and then click “Connect” button. Step14. The configuration screen of the printer will appear. Now, you can find the new port “Gigabyte(1)” will appear on the port checked list. Please select the new bluetooth port of the printer which you have been installed, and then click “Apply” button. Now, please go to the General Page and click “Print Test Page” button to check if the setup is succussfully.
GN-BTP01 Bluet ooth USB P rinter Adapter Limited Warranty 1-Year Warranty Gigabyte warrants to the original consumer/purchaser that the product free from defects in material and workmanship for no limited time from the original manufactory shipment date. This warranty does not cover the product if it is damaged in the process of being installed or improperly used. Gigabyte may replace or repair the product with either new or reconditioned parts.
GN-BTP01 Bluet ooth USB P rinter Adapter 15
www.gigabyte.com.
