Operation Manual

2
English
Getting Started
Before you start to use this headset you should
♦ Charge the headset.
♦ Pair the headset with a device.

Charging
First Time Charging : GN-BT01H must be charged fully before you
use headset for the first time.
During Charging : Indicator light shows steady RED light.
Fully Charged : Indicator light goes off.
The headset can be charged either using a power adapter or a USB
cable charging from PC.

Turn on the Headset
Press “Call Handling Button” for 2 seconds and you will see flashing
Blue Indicator light then release the button.
USB
Connector
To
p
Dongle Mode
Indicator