Owner's Manual

ManualsBrandsGIGABYTE ManualsPC ComponentsGIGABYTE GBT CPU Waterblock

Accessories

Step1

Specications

Installation Guide

Waterblock Installation

Step 2

Step 3

Step 4

AMD AM2 Clip Installation

Step 5

MOSFET Air Cooling Fan Installation

Step 6

Warning : Before coming to use, please conrm that tubes are secured with tube clips.

Tube clips comes with GIGABYTE

1/2" tube which can prevent it from leakage.

( Figure a ) ( Figure b )

GH-WPBC1

1) MOSFET Air Cooling Fan

2) Waterblock

3) Intel

Pentium

4 LGA775

Spring Screws

4) Intel

Pentium

4 LGA775 Back

Plate

Fan size

Fan speed

Fan Connector

Bearing

Noise

Intel

Pentium

Extreme Edition Series

Intel

Pentium

D Processor Series

Intel

Pentium

4 Processor Series

( LGA775 )

Intel

Core

2 Duo Processor Series

AMD AM2 Series

AMD Athlon

FX Series

AMD Athlon

64x2 Series

AMD Athlon

64 Series

6-1. Place MOSFET air cooling fan on the top of

waterblock and make sure that four feet of the air

cooling fan are secured on waterblock.

6-2. Plug the power cord of MOSFET air cooling fan

in the socket on the motherboard's CPU fan.

Align the waterbolck to the raised point on the

CPU and push down the bar.

Align the waterbolck to three raised point on the

CPU and push down the bar to surely secured.

AMD K8 Clip Installation

Intel

Pentium

4 LGA775 Bracket Installation

Replace AMD K8 bracket with Intel

Pentium

4 LGA775 bracket. ( Figure a )

Place the waterblock on the top of Intel

Pentium

4 LGA775 CPU ( Figure b ) and adjust the appropriate

installation direction. ( Figure c )

Warning :

Please make sure to take off the "CAUTION"

sticker and apply the grease on the CPU

surface evenly.

Intel

Pentium

4 LGA775 Back Plate Installation

( For AMD series CPU, please ignore this step )

Take off the double-side sticker on the Intel

Pentium

LGA775 back plate ( as Figure a ), and stick it on the back

of Intel

Pentium

4 LGA775 CPU with aligning four holes

on Intel

Pentium

4 LGA775 back plate to four holes on

the back of Intel

Pentium

4 LAG775 CPU motherboard

(as Figure b).

5) Intel

Pentium

4 LGA775 Bracket

6) ADM K8 / AM2 Clip

7) AMD K8 / AM2 Bracket

8) Grease

Mosfet cooling Fan

Compatible CPU

80 x 80 x 25 mm

2000 RPM

3 pin

EBR

19 dBA

AMD K8 bracket can be removed from the waterblock ( Figure a ) to adjust the appropriate

installation direction. ( Figure b / c )

Secure Intel

Pentium

4 LGA775 motherboard with attached spring screws.( Figure c )

Caution :

1. Before pouring liquid coolant into the tank to test the

liquid cooling system, please reconrm all the tubes have

been fastened and the tube clips are in the right position.

2. While removing the tubes for disassembly, please make

sure to keep all the devices away from any electronic

part.

The following are not covered by the warranty:

1. Use the product incorrectly or in a manner other than the

designed purpose.

2. Nonobservance of the proper operation provided. (e.g. over-

clocking)

3. Malfunction due to interference from other devices.

4. Unauthorized modication of the product.

5. Consequential damage to other objects due to the product’s

fault.

6. Malfunction arising from casualties (earthquake, thunder, re,

and ood).

7. The product’s warranty label has been removed or damaged.

8. The devices inside, including power supply, hard disk, CD-

ROM drive, motherboard, ventilator, etc, are not detached from

the chassis prior to the transportation of the computer product,

resulting in damage to the chassis or computer-related devices.

9. Any loss caused by failure to follow the installation process

contained in the user.

10. Any damage to the system arising from leakage of coolant due

to improper installation.

11. Use only GIGABYTE

Liquid Coolant. Any damage arising

from the use of liquids other than GIGABYTE

Liquid Coolant

is not covered by the warranty.

( Figure a ) ( Figure b ) ( Figure c )

( Figure a ) ( Figure b ) ( Figure c ) ( Figure d )