Intel® Pentium® 4 LGA775 Installation Guide GH-ESB21-TH REV.
English Table of Contents Checklist.............................................................................................................3 Specification........................................................................................................4 Feature..............................................................................................................4 Precautions........................................................................................................
English Checklist (1) GH-ESB21-TH Cooler x 1 (2) GH-ESB21-TH Installation Guide x 1 (3) Grease x 1 (4) Screw x 4 -3- GH-ESB21-TH
English Specification y y y y y y Fan Dimension : 92 x 92 x 38 mm Heat Sink Dimension : 86 x 123 x 71 mm Material : Extrusion Aluminum fin + Copper core Fan Speed Control: PWM & Temperature Control Connector: 4 pin Rated Voltage : 12V y y y y y y Rated Current : 1.13Amp (max) Airflow : 91.
The cooler fan speed levels provided are for reference use only. Please refer to the motherboard BIOS to verify actual fan speed levels. Before use, please remove the bottom protective layer of the cooler. Please make sure the computer is turned off and its power disconnected prior to installation. Warranty Item Incorrect method of operation or use of product not for intended use. Operational use beyond the advised standards (eg. overclocking).
English Installation Instructions for P4 LGA775 & Cooler Fig.1 Apply an even layer of thermal paste on the surface of the installed CPU. Fig.2 Install the motherboard in the chassis. Align the GH-ESB21-TH Cooler with the screw holes and place it onto the motherboard. Before use, please remove the bottom protective layer of the cooler. Fig.3 Fasten the cooler with screws (Note). Assure that the cooler is securely attached to the motherboard and chassis. Fig.
English (Note) The four screws can be screwed as below: Combination 1: A+C+D+F or Combination 2: B+C+E+F A D B E C F -7- GH-ESB21-TH
English GH-ESB21-TH -8-