Owner's Manual

18GB-AEGT-SI/GB-AEGTN-SI
Menu Options Descriptions
Auto Adjust Optimizes and adjusts the screen settings automatically.
When you connect a digital video output using a DVI or HDMI cable to
your monitor, the Auto Adjust function will be disabled.
Luminance There are two submenus available.
• Brightness Adjusts the balance between light and dark shades.
• Contrast Adjusts the degree of difference between darkness and light-
ness.
Press the Brightness/Increase or Volume/Decrease buttons on the front panel to
adjust the degree from 0 to 100.
Color Adjusts the level of Red, Green, and Blue primary colors to change the Adjusts the
level of Red, Green, and Blue primary colors to change the color tint of the image.
The default start setting is 50.
Press the Brightness/Increase or Volume/Decrease color tint of the image. The
default start setting is 50.
Press the Brightness/Increase or Volume/Decrease
Recall Resets all settings to the factory default values.
Miscellaneous There are three submenus available.
• Display
Information
Displays the current monitor property settings.
• Display
Mode
This feature is provided to allow aspect ratios other than 16:9 to
be displayed without geometric distortion.
• Aspect: Scales the input image to ll the screen. Ideal for
16:9 aspect images.
• Full: The input image is displayed without geometric
distortion.
The function is available only when the input source is
D-Sub.
• Over Scan Slightly enlarges the input image. Activates this feature to hide
annoying edge noise if present around your image.
The function is available only when the input source is
HDMI.
Select Exit to return to the previous menu.
Exit Selects to exit OSD.